Investigations of combustion process in stove fired on biomass

1066 Views
759 Downloads
Export citation: ABNT
MANIĆ, Nebojša G.;JOVANOVIĆ, Vladimir V.;RADOVANOVIĆ, Milan R.;MANIĆ, Nebojša G.;RADULOVIĆ, Ivo R.;PERIŠIĆ, Slobodan V..
Investigations of combustion process in stove fired on biomass. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 51, n.7-8, p. 426-430, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/investigations-of-combustion-process-in-stove-fired-on-biomass/>. Date accessed: 17 sep. 2021. 
doi:http://dx.doi.org/.
Manić, N., Jovanović, V., Radovanović, M., Manić, N., Radulović, I., & Perišić, S.
(2005).
Investigations of combustion process in stove fired on biomass.
Strojniški vestnik - Journal of Mechanical Engineering, 51(7-8), 426-430.
doi:http://dx.doi.org/
@article{.,
	author = {Nebojša G. Manić and Vladimir V. Jovanović and Milan R. Radovanović and Nebojša G. Manić and Ivo R. Radulović and Slobodan V. Perišić},
	title = {Investigations of combustion process in stove fired on biomass},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	keywords = {biomass; combustion; },
	abstract = {The aim of the investigation was to make some reconstructions on the existing stove used for cooking and baking and to obtain the combined cooker–boiler which will fulfill the demands of European standard EN 12815. Implementation of modern scientific achievements in the field of combustion on stoves and furnaces fired on biomass was used. During the investigations four various constructions were made with different fresh air inlet and secondary air supply with the intention to obtain more complete combustion with increased efficiency and reduced CO emission. Three different fuels were used: firewood, coal, and wood briquette. A numerous parameters were measured: fuel weight changes during the combustion process, temperature of inlet and outlet water, flue gas composition (O2, CO, SO2, CO2, NOx), flue gas temperature, ash quantity ect. The result of the investigations is the stove with the efficiency of more than 75% - boiler Class 1 (according EN 12815) and CO emission of about 1 %v/v. The results obtained during the measurements were used as parameters for modeling of combustion process.},
	issn = {0039-2480},	pages = {426-430},	doi = {},
	url = {https://www.sv-jme.eu/article/investigations-of-combustion-process-in-stove-fired-on-biomass/}
}
Manić, N.,Jovanović, V.,Radovanović, M.,Manić, N.,Radulović, I.,Perišić, S.
2005 November 51. Investigations of combustion process in stove fired on biomass. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 51:7-8
%A Manić, Nebojša G.
%A Jovanović, Vladimir V.
%A Radovanović, Milan R.
%A Manić, Nebojša G.
%A Radulović, Ivo R.
%A Perišić, Slobodan V.
%D 2005
%T Investigations of combustion process in stove fired on biomass
%B 2005
%9 biomass; combustion; 
%! Investigations of combustion process in stove fired on biomass
%K biomass; combustion; 
%X The aim of the investigation was to make some reconstructions on the existing stove used for cooking and baking and to obtain the combined cooker–boiler which will fulfill the demands of European standard EN 12815. Implementation of modern scientific achievements in the field of combustion on stoves and furnaces fired on biomass was used. During the investigations four various constructions were made with different fresh air inlet and secondary air supply with the intention to obtain more complete combustion with increased efficiency and reduced CO emission. Three different fuels were used: firewood, coal, and wood briquette. A numerous parameters were measured: fuel weight changes during the combustion process, temperature of inlet and outlet water, flue gas composition (O2, CO, SO2, CO2, NOx), flue gas temperature, ash quantity ect. The result of the investigations is the stove with the efficiency of more than 75% - boiler Class 1 (according EN 12815) and CO emission of about 1 %v/v. The results obtained during the measurements were used as parameters for modeling of combustion process.
%U https://www.sv-jme.eu/article/investigations-of-combustion-process-in-stove-fired-on-biomass/
%0 Journal Article
%R 
%& 426
%P 5
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 51
%N 7-8
%@ 0039-2480
%8 2017-11-03
%7 2017-11-03
Manić, Nebojša, Vladimir V. Jovanović, Milan R. Radovanović, Nebojša G. Manić, Ivo R. Radulović, & Slobodan V. Perišić.
"Investigations of combustion process in stove fired on biomass." Strojniški vestnik - Journal of Mechanical Engineering [Online], 51.7-8 (2005): 426-430. Web.  17 Sep. 2021
TY  - JOUR
AU  - Manić, Nebojša G.
AU  - Jovanović, Vladimir V.
AU  - Radovanović, Milan R.
AU  - Manić, Nebojša G.
AU  - Radulović, Ivo R.
AU  - Perišić, Slobodan V.
PY  - 2005
TI  - Investigations of combustion process in stove fired on biomass
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - biomass; combustion; 
N2  - The aim of the investigation was to make some reconstructions on the existing stove used for cooking and baking and to obtain the combined cooker–boiler which will fulfill the demands of European standard EN 12815. Implementation of modern scientific achievements in the field of combustion on stoves and furnaces fired on biomass was used. During the investigations four various constructions were made with different fresh air inlet and secondary air supply with the intention to obtain more complete combustion with increased efficiency and reduced CO emission. Three different fuels were used: firewood, coal, and wood briquette. A numerous parameters were measured: fuel weight changes during the combustion process, temperature of inlet and outlet water, flue gas composition (O2, CO, SO2, CO2, NOx), flue gas temperature, ash quantity ect. The result of the investigations is the stove with the efficiency of more than 75% - boiler Class 1 (according EN 12815) and CO emission of about 1 %v/v. The results obtained during the measurements were used as parameters for modeling of combustion process.
UR  - https://www.sv-jme.eu/article/investigations-of-combustion-process-in-stove-fired-on-biomass/
@article{{}{.},
	author = {Manić, N., Jovanović, V., Radovanović, M., Manić, N., Radulović, I., Perišić, S.},
	title = {Investigations of combustion process in stove fired on biomass},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	doi = {},
	url = {https://www.sv-jme.eu/article/investigations-of-combustion-process-in-stove-fired-on-biomass/}
}
TY  - JOUR
AU  - Manić, Nebojša G.
AU  - Jovanović, Vladimir V.
AU  - Radovanović, Milan R.
AU  - Manić, Nebojša G.
AU  - Radulović, Ivo R.
AU  - Perišić, Slobodan V.
PY  - 2017/11/03
TI  - Investigations of combustion process in stove fired on biomass
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 51, No 7-8 (2005): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - biomass, combustion, 
N2  - The aim of the investigation was to make some reconstructions on the existing stove used for cooking and baking and to obtain the combined cooker–boiler which will fulfill the demands of European standard EN 12815. Implementation of modern scientific achievements in the field of combustion on stoves and furnaces fired on biomass was used. During the investigations four various constructions were made with different fresh air inlet and secondary air supply with the intention to obtain more complete combustion with increased efficiency and reduced CO emission. Three different fuels were used: firewood, coal, and wood briquette. A numerous parameters were measured: fuel weight changes during the combustion process, temperature of inlet and outlet water, flue gas composition (O2, CO, SO2, CO2, NOx), flue gas temperature, ash quantity ect. The result of the investigations is the stove with the efficiency of more than 75% - boiler Class 1 (according EN 12815) and CO emission of about 1 %v/v. The results obtained during the measurements were used as parameters for modeling of combustion process.
UR  - https://www.sv-jme.eu/article/investigations-of-combustion-process-in-stove-fired-on-biomass/
Manić, Nebojša, Jovanović, Vladimir, Radovanović, Milan, Manić, Nebojša, Radulović, Ivo, AND Perišić, Slobodan.
"Investigations of combustion process in stove fired on biomass" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 51 Number 7-8 (03 November 2017)

Authors

Affiliations

  • University of Belgrade, Serbia
  • University of Belgrade, Serbia
  • University of Belgrade, Serbia
  • University of Belgrade, Serbia
  • University of Belgrade, Serbia
  • Milan Blagojević a.d., Serbia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 51(2005)7-8, 426-430

The aim of the investigation was to make some reconstructions on the existing stove used for cooking and baking and to obtain the combined cooker–boiler which will fulfill the demands of European standard EN 12815. Implementation of modern scientific achievements in the field of combustion on stoves and furnaces fired on biomass was used. During the investigations four various constructions were made with different fresh air inlet and secondary air supply with the intention to obtain more complete combustion with increased efficiency and reduced CO emission. Three different fuels were used: firewood, coal, and wood briquette. A numerous parameters were measured: fuel weight changes during the combustion process, temperature of inlet and outlet water, flue gas composition (O2, CO, SO2, CO2, NOx), flue gas temperature, ash quantity ect. The result of the investigations is the stove with the efficiency of more than 75% - boiler Class 1 (according EN 12815) and CO emission of about 1 %v/v. The results obtained during the measurements were used as parameters for modeling of combustion process.

biomass; combustion;