Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites

758 Views
612 Downloads
Export citation: ABNT
ŠUŠTERŠIČ, Borivoj ;KOSEC, Ladislav ;DOLINŠEK, Slavko .
Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 46, n.2, p. 90-102, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/>. Date accessed: 21 oct. 2020. 
doi:http://dx.doi.org/.
Šušteršič, B., Kosec, L., & Dolinšek, S.
(2000).
Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites.
Strojniški vestnik - Journal of Mechanical Engineering, 46(2), 90-102.
doi:http://dx.doi.org/
@article{.,
	author = {Borivoj  Šušteršič and Ladislav  Kosec and Slavko  Dolinšek},
	title = {Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {2},
	year = {2000},
	keywords = {Self lubricating composites; Fe-based composites; machinability; cutting forces; },
	abstract = {In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess.},
	issn = {0039-2480},	pages = {90-102},	doi = {},
	url = {https://www.sv-jme.eu/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/}
}
Šušteršič, B.,Kosec, L.,Dolinšek, S.
2000 July 46. Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 46:2
%A Šušteršič, Borivoj 
%A Kosec, Ladislav 
%A Dolinšek, Slavko 
%D 2000
%T Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites
%B 2000
%9 Self lubricating composites; Fe-based composites; machinability; cutting forces; 
%! Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites
%K Self lubricating composites; Fe-based composites; machinability; cutting forces; 
%X In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess.
%U https://www.sv-jme.eu/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/
%0 Journal Article
%R 
%& 90
%P 13
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 46
%N 2
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Šušteršič, Borivoj, Ladislav  Kosec, & Slavko  Dolinšek.
"Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites." Strojniški vestnik - Journal of Mechanical Engineering [Online], 46.2 (2000): 90-102. Web.  21 Oct. 2020
TY  - JOUR
AU  - Šušteršič, Borivoj 
AU  - Kosec, Ladislav 
AU  - Dolinšek, Slavko 
PY  - 2000
TI  - Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Self lubricating composites; Fe-based composites; machinability; cutting forces; 
N2  - In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess.
UR  - https://www.sv-jme.eu/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/
@article{{}{.},
	author = {Šušteršič, B., Kosec, L., Dolinšek, S.},
	title = {Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {2},
	year = {2000},
	doi = {},
	url = {https://www.sv-jme.eu/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/}
}
TY  - JOUR
AU  - Šušteršič, Borivoj 
AU  - Kosec, Ladislav 
AU  - Dolinšek, Slavko 
PY  - 2017/07/07
TI  - Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 46, No 2 (2000): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Self lubricating composites, Fe-based composites, machinability, cutting forces, 
N2  - In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess.
UR  - https://www.sv-jme.eu/article/machinability-of-hot-pressed-self-lubricating-fe-mns-and-fe-mos2-composites/
Šušteršič, Borivoj, Kosec, Ladislav, AND Dolinšek, Slavko.
"Machinability of hot-Pressed Self-Lubricating Fe-MnS and Fe-MoS2 Composites" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 46 Number 2 (07 July 2017)

Authors

Affiliations

  • Institute of Metals and Technology, Ljubljana, Slovenia
  • University of Ljubljana, Faculty of Natural Science and Engineering, Materials and Metallurgy department, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 46(2000)2, 90-102

In addition to the standardised tribological tests for determination of the coefficient of friction and wear at the sliding contacts under exactly defined testing conditions, the measured magnitudes of cutting forces can also be used as a measure for the self-lubrication of the composites produced. Such data are most commonly used as a measure for the machinability characteristics of a particular material. The paper presents the results of the synthesis of a Fe-MnS and Fe-MoS2, composites produced with the process of hot-pressing. The microstructural properties are related with the values of the cutting forces which were measured during the longitudinal turning porcess.

Self lubricating composites; Fe-based composites; machinability; cutting forces;