Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process

1548 Views
838 Downloads
Export citation: ABNT
ZAWADA-TOMKIEWICZ, Anna ;ŚCIEGIENKA, Ryszard ;ZUPERL, Uros ;STĘPIEŃ, Krzysztof .
Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 65, n.7-8, p. 410-419, july 2019. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/machined-surface-image-in-the-efficiency-evaluation-of-micro-smoothing-process/>. Date accessed: 04 mar. 2021. 
doi:http://dx.doi.org/10.5545/sv-jme.2018.5883.
Zawada-Tomkiewicz, A., Ściegienka, R., Zuperl, U., & Stępień, K.
(2019).
Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process.
Strojniški vestnik - Journal of Mechanical Engineering, 65(7-8), 410-419.
doi:http://dx.doi.org/10.5545/sv-jme.2018.5883
@article{sv-jmesv-jme.2018.5883,
	author = {Anna  Zawada-Tomkiewicz and Ryszard  Ściegienka and Uros  Zuperl and Krzysztof  Stępień},
	title = {Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {7-8},
	year = {2019},
	keywords = {machining, belt grinding, micro-smoothing, image processing, wavelet analysis},
	abstract = {The micro-smoothing in this paper concerns belt-grinding operations in two varieties that differ in the use of axial oscillations. The method relies on the continuous slow introduction of the finishing film in the working zone. The film is applied to the rotating workpiece with a defined pressure and axial oscillation. The quality of the machined surface is evaluated as a function of the finishing time. A model of the belt-grinding efficiency was developed taking into account the machined surface quality. In a monitoring system, an image of the machined surface was applied, decomposed into ten sub-images, which in turn were described by the energy parameter. The decrease of image energy was modelled, and the efficiency of the micro-smoothing process was evaluated, which in turn enabled the estimation of the finishing time. The results confirmed the correctness of the proposed methodology in the analysis of the finishing time of the belt-grinding operations.},
	issn = {0039-2480},	pages = {410-419},	doi = {10.5545/sv-jme.2018.5883},
	url = {https://www.sv-jme.eu/article/machined-surface-image-in-the-efficiency-evaluation-of-micro-smoothing-process/}
}
Zawada-Tomkiewicz, A.,Ściegienka, R.,Zuperl, U.,Stępień, K.
2019 July 65. Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 65:7-8
%A Zawada-Tomkiewicz, Anna 
%A Ściegienka, Ryszard 
%A Zuperl, Uros 
%A Stępień, Krzysztof 
%D 2019
%T Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process
%B 2019
%9 machining, belt grinding, micro-smoothing, image processing, wavelet analysis
%! Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process
%K machining, belt grinding, micro-smoothing, image processing, wavelet analysis
%X The micro-smoothing in this paper concerns belt-grinding operations in two varieties that differ in the use of axial oscillations. The method relies on the continuous slow introduction of the finishing film in the working zone. The film is applied to the rotating workpiece with a defined pressure and axial oscillation. The quality of the machined surface is evaluated as a function of the finishing time. A model of the belt-grinding efficiency was developed taking into account the machined surface quality. In a monitoring system, an image of the machined surface was applied, decomposed into ten sub-images, which in turn were described by the energy parameter. The decrease of image energy was modelled, and the efficiency of the micro-smoothing process was evaluated, which in turn enabled the estimation of the finishing time. The results confirmed the correctness of the proposed methodology in the analysis of the finishing time of the belt-grinding operations.
%U https://www.sv-jme.eu/article/machined-surface-image-in-the-efficiency-evaluation-of-micro-smoothing-process/
%0 Journal Article
%R 10.5545/sv-jme.2018.5883
%& 410
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 65
%N 7-8
%@ 0039-2480
%8 2019-07-19
%7 2019-07-19
Zawada-Tomkiewicz, Anna, Ryszard  Ściegienka, Uros  Zuperl, & Krzysztof  Stępień.
"Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 65.7-8 (2019): 410-419. Web.  04 Mar. 2021
TY  - JOUR
AU  - Zawada-Tomkiewicz, Anna 
AU  - Ściegienka, Ryszard 
AU  - Zuperl, Uros 
AU  - Stępień, Krzysztof 
PY  - 2019
TI  - Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5883
KW  - machining, belt grinding, micro-smoothing, image processing, wavelet analysis
N2  - The micro-smoothing in this paper concerns belt-grinding operations in two varieties that differ in the use of axial oscillations. The method relies on the continuous slow introduction of the finishing film in the working zone. The film is applied to the rotating workpiece with a defined pressure and axial oscillation. The quality of the machined surface is evaluated as a function of the finishing time. A model of the belt-grinding efficiency was developed taking into account the machined surface quality. In a monitoring system, an image of the machined surface was applied, decomposed into ten sub-images, which in turn were described by the energy parameter. The decrease of image energy was modelled, and the efficiency of the micro-smoothing process was evaluated, which in turn enabled the estimation of the finishing time. The results confirmed the correctness of the proposed methodology in the analysis of the finishing time of the belt-grinding operations.
UR  - https://www.sv-jme.eu/article/machined-surface-image-in-the-efficiency-evaluation-of-micro-smoothing-process/
@article{{sv-jme}{sv-jme.2018.5883},
	author = {Zawada-Tomkiewicz, A., Ściegienka, R., Zuperl, U., Stępień, K.},
	title = {Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {7-8},
	year = {2019},
	doi = {10.5545/sv-jme.2018.5883},
	url = {https://www.sv-jme.eu/article/machined-surface-image-in-the-efficiency-evaluation-of-micro-smoothing-process/}
}
TY  - JOUR
AU  - Zawada-Tomkiewicz, Anna 
AU  - Ściegienka, Ryszard 
AU  - Zuperl, Uros 
AU  - Stępień, Krzysztof 
PY  - 2019/07/19
TI  - Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 65, No 7-8 (2019): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5883
KW  - machining, belt grinding, micro-smoothing, image processing, wavelet analysis
N2  - The micro-smoothing in this paper concerns belt-grinding operations in two varieties that differ in the use of axial oscillations. The method relies on the continuous slow introduction of the finishing film in the working zone. The film is applied to the rotating workpiece with a defined pressure and axial oscillation. The quality of the machined surface is evaluated as a function of the finishing time. A model of the belt-grinding efficiency was developed taking into account the machined surface quality. In a monitoring system, an image of the machined surface was applied, decomposed into ten sub-images, which in turn were described by the energy parameter. The decrease of image energy was modelled, and the efficiency of the micro-smoothing process was evaluated, which in turn enabled the estimation of the finishing time. The results confirmed the correctness of the proposed methodology in the analysis of the finishing time of the belt-grinding operations.
UR  - https://www.sv-jme.eu/article/machined-surface-image-in-the-efficiency-evaluation-of-micro-smoothing-process/
Zawada-Tomkiewicz, Anna, Ściegienka, Ryszard, Zuperl, Uros, AND Stępień, Krzysztof.
"Images of the Machined Surface in Evaluation of the Efficiency of a Micro-Smoothing Process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 65 Number 7-8 (19 July 2019)

Authors

Affiliations

  • Koszalin University of Technology, Poland 1
  • University of Maribor, Faculty of Mechanical Engineering, Slovenia 2
  • Kielce University of Technology, Poland 3

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 65(2019)7-8, 410-419

https://doi.org/10.5545/sv-jme.2018.5883

The micro-smoothing in this paper concerns belt-grinding operations in two varieties that differ in the use of axial oscillations. The method relies on the continuous slow introduction of the finishing film in the working zone. The film is applied to the rotating workpiece with a defined pressure and axial oscillation. The quality of the machined surface is evaluated as a function of the finishing time. A model of the belt-grinding efficiency was developed taking into account the machined surface quality. In a monitoring system, an image of the machined surface was applied, decomposed into ten sub-images, which in turn were described by the energy parameter. The decrease of image energy was modelled, and the efficiency of the micro-smoothing process was evaluated, which in turn enabled the estimation of the finishing time. The results confirmed the correctness of the proposed methodology in the analysis of the finishing time of the belt-grinding operations.

machining, belt grinding, micro-smoothing, image processing, wavelet analysis