PIRNAT, Miha ;SAVŠEK, Zdenko ;BOLTEŽAR, Miha . Measuring Dynamic Loads on a Foldable City Bicycle. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.1, p. 21-26, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/measuring-dynamic-loads-on-a-foldable-city-bicycle/>. Date accessed: 10 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2009.149.
Pirnat, M., Savšek, Z., & Boltežar, M. (2011). Measuring Dynamic Loads on a Foldable City Bicycle. Strojniški vestnik - Journal of Mechanical Engineering, 57(1), 21-26. doi:http://dx.doi.org/10.5545/sv-jme.2009.149
@article{sv-jmesv-jme.2009.149, author = {Miha Pirnat and Zdenko Savšek and Miha Boltežar}, title = {Measuring Dynamic Loads on a Foldable City Bicycle}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {1}, year = {2011}, keywords = {foldable bicycles; dynamic loads; strain gauges; Wheatstone bridge}, abstract = {Strain gauges have been used to measure dynamic loads on a foldable bicycle while it is being ridden. Eight full, Wheatstone-bridge measuring points were used to measure the forces on the front and rear wheels, the handlebars, the seat and the pedals. These bridges were positioned at special measuring parts that simplified the measurements. Some of the measuring problems that were successfully resolved are described. The measuring took place on public roads where real-life data was gathered for various riding situations. For an easier interpretation of the data, a camera, an encoder and a GPS system were used. The results are shown for some riding situations and their impact on the design of foldable bicycles is discussed.}, issn = {0039-2480}, pages = {21-26}, doi = {10.5545/sv-jme.2009.149}, url = {https://www.sv-jme.eu/article/measuring-dynamic-loads-on-a-foldable-city-bicycle/} }
Pirnat, M.,Savšek, Z.,Boltežar, M. 2011 June 57. Measuring Dynamic Loads on a Foldable City Bicycle. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:1
%A Pirnat, Miha %A Savšek, Zdenko %A Boltežar, Miha %D 2011 %T Measuring Dynamic Loads on a Foldable City Bicycle %B 2011 %9 foldable bicycles; dynamic loads; strain gauges; Wheatstone bridge %! Measuring Dynamic Loads on a Foldable City Bicycle %K foldable bicycles; dynamic loads; strain gauges; Wheatstone bridge %X Strain gauges have been used to measure dynamic loads on a foldable bicycle while it is being ridden. Eight full, Wheatstone-bridge measuring points were used to measure the forces on the front and rear wheels, the handlebars, the seat and the pedals. These bridges were positioned at special measuring parts that simplified the measurements. Some of the measuring problems that were successfully resolved are described. The measuring took place on public roads where real-life data was gathered for various riding situations. For an easier interpretation of the data, a camera, an encoder and a GPS system were used. The results are shown for some riding situations and their impact on the design of foldable bicycles is discussed. %U https://www.sv-jme.eu/article/measuring-dynamic-loads-on-a-foldable-city-bicycle/ %0 Journal Article %R 10.5545/sv-jme.2009.149 %& 21 %P 6 %J Strojniški vestnik - Journal of Mechanical Engineering %V 57 %N 1 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Pirnat, Miha, Zdenko Savšek, & Miha Boltežar. "Measuring Dynamic Loads on a Foldable City Bicycle." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.1 (2011): 21-26. Web. 10 Dec. 2024
TY - JOUR AU - Pirnat, Miha AU - Savšek, Zdenko AU - Boltežar, Miha PY - 2011 TI - Measuring Dynamic Loads on a Foldable City Bicycle JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2009.149 KW - foldable bicycles; dynamic loads; strain gauges; Wheatstone bridge N2 - Strain gauges have been used to measure dynamic loads on a foldable bicycle while it is being ridden. Eight full, Wheatstone-bridge measuring points were used to measure the forces on the front and rear wheels, the handlebars, the seat and the pedals. These bridges were positioned at special measuring parts that simplified the measurements. Some of the measuring problems that were successfully resolved are described. The measuring took place on public roads where real-life data was gathered for various riding situations. For an easier interpretation of the data, a camera, an encoder and a GPS system were used. The results are shown for some riding situations and their impact on the design of foldable bicycles is discussed. UR - https://www.sv-jme.eu/article/measuring-dynamic-loads-on-a-foldable-city-bicycle/
@article{{sv-jme}{sv-jme.2009.149}, author = {Pirnat, M., Savšek, Z., Boltežar, M.}, title = {Measuring Dynamic Loads on a Foldable City Bicycle}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {1}, year = {2011}, doi = {10.5545/sv-jme.2009.149}, url = {https://www.sv-jme.eu/article/measuring-dynamic-loads-on-a-foldable-city-bicycle/} }
TY - JOUR AU - Pirnat, Miha AU - Savšek, Zdenko AU - Boltežar, Miha PY - 2018/06/28 TI - Measuring Dynamic Loads on a Foldable City Bicycle JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 1 (2011): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2009.149 KW - foldable bicycles, dynamic loads, strain gauges, Wheatstone bridge N2 - Strain gauges have been used to measure dynamic loads on a foldable bicycle while it is being ridden. Eight full, Wheatstone-bridge measuring points were used to measure the forces on the front and rear wheels, the handlebars, the seat and the pedals. These bridges were positioned at special measuring parts that simplified the measurements. Some of the measuring problems that were successfully resolved are described. The measuring took place on public roads where real-life data was gathered for various riding situations. For an easier interpretation of the data, a camera, an encoder and a GPS system were used. The results are shown for some riding situations and their impact on the design of foldable bicycles is discussed. UR - https://www.sv-jme.eu/article/measuring-dynamic-loads-on-a-foldable-city-bicycle/
Pirnat, Miha, Savšek, Zdenko, AND Boltežar, Miha. "Measuring Dynamic Loads on a Foldable City Bicycle" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 1 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 57(2011)1, 21-26
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Strain gauges have been used to measure dynamic loads on a foldable bicycle while it is being ridden. Eight full, Wheatstone-bridge measuring points were used to measure the forces on the front and rear wheels, the handlebars, the seat and the pedals. These bridges were positioned at special measuring parts that simplified the measurements. Some of the measuring problems that were successfully resolved are described. The measuring took place on public roads where real-life data was gathered for various riding situations. For an easier interpretation of the data, a camera, an encoder and a GPS system were used. The results are shown for some riding situations and their impact on the design of foldable bicycles is discussed.