Microforming Current Status and Future Demands

1707 Views
1074 Downloads
Export citation: ABNT
GEIßDÖRFER, Stefan ;PUTZ, Alexander ;ENGEL, Ulf .
Microforming  Current Status and Future Demands. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 52, n.7-8, p. 495-505, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/microforming-current-status-and-future-demands/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/.
Geißdörfer, S., Putz, A., & Engel, U.
(2006).
Microforming  Current Status and Future Demands.
Strojniški vestnik - Journal of Mechanical Engineering, 52(7-8), 495-505.
doi:http://dx.doi.org/
@article{.,
	author = {Stefan  Geißdörfer and Alexander  Putz and Ulf  Engel},
	title = {Microforming  Current Status and Future Demands},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {7-8},
	year = {2006},
	keywords = {microforming; current status; future demands; },
	abstract = {Microforming technology is gaining increasing interest from the metal-forming community. This can be explained by the large number of new applications and products delivered to market in the past, yielding smaller and smaller geometrical dimensions of the final products and thus demanding the smallest specimens to be manufactured in large quantities. Up to now, most of these parts were being manufactured by machining technology, well suited to the production of small series. The analysis of the current market situation shows that the steadily increasing trend towards the smallest products is continuing in the future and thus requires new manufacturing technologies for large-quantity production. Forming technology seems to be well suited due to its high production output and high accuracy. The aim of this paper is to give an overview of the current research activities related to microforming technology, showing microforming technology’s capabilities and problems. The analysis of the current status will give a hint to existing gaps in knowledge and finally describe the future demands.},
	issn = {0039-2480},	pages = {495-505},	doi = {},
	url = {https://www.sv-jme.eu/article/microforming-current-status-and-future-demands/}
}
Geißdörfer, S.,Putz, A.,Engel, U.
2006 August 52. Microforming  Current Status and Future Demands. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 52:7-8
%A Geißdörfer, Stefan 
%A Putz, Alexander 
%A Engel, Ulf 
%D 2006
%T Microforming  Current Status and Future Demands
%B 2006
%9 microforming; current status; future demands; 
%! Microforming  Current Status and Future Demands
%K microforming; current status; future demands; 
%X Microforming technology is gaining increasing interest from the metal-forming community. This can be explained by the large number of new applications and products delivered to market in the past, yielding smaller and smaller geometrical dimensions of the final products and thus demanding the smallest specimens to be manufactured in large quantities. Up to now, most of these parts were being manufactured by machining technology, well suited to the production of small series. The analysis of the current market situation shows that the steadily increasing trend towards the smallest products is continuing in the future and thus requires new manufacturing technologies for large-quantity production. Forming technology seems to be well suited due to its high production output and high accuracy. The aim of this paper is to give an overview of the current research activities related to microforming technology, showing microforming technology’s capabilities and problems. The analysis of the current status will give a hint to existing gaps in knowledge and finally describe the future demands.
%U https://www.sv-jme.eu/article/microforming-current-status-and-future-demands/
%0 Journal Article
%R 
%& 495
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 52
%N 7-8
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18
Geißdörfer, Stefan, Alexander  Putz, & Ulf  Engel.
"Microforming  Current Status and Future Demands." Strojniški vestnik - Journal of Mechanical Engineering [Online], 52.7-8 (2006): 495-505. Web.  29 Mar. 2024
TY  - JOUR
AU  - Geißdörfer, Stefan 
AU  - Putz, Alexander 
AU  - Engel, Ulf 
PY  - 2006
TI  - Microforming  Current Status and Future Demands
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - microforming; current status; future demands; 
N2  - Microforming technology is gaining increasing interest from the metal-forming community. This can be explained by the large number of new applications and products delivered to market in the past, yielding smaller and smaller geometrical dimensions of the final products and thus demanding the smallest specimens to be manufactured in large quantities. Up to now, most of these parts were being manufactured by machining technology, well suited to the production of small series. The analysis of the current market situation shows that the steadily increasing trend towards the smallest products is continuing in the future and thus requires new manufacturing technologies for large-quantity production. Forming technology seems to be well suited due to its high production output and high accuracy. The aim of this paper is to give an overview of the current research activities related to microforming technology, showing microforming technology’s capabilities and problems. The analysis of the current status will give a hint to existing gaps in knowledge and finally describe the future demands.
UR  - https://www.sv-jme.eu/article/microforming-current-status-and-future-demands/
@article{{}{.},
	author = {Geißdörfer, S., Putz, A., Engel, U.},
	title = {Microforming  Current Status and Future Demands},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {7-8},
	year = {2006},
	doi = {},
	url = {https://www.sv-jme.eu/article/microforming-current-status-and-future-demands/}
}
TY  - JOUR
AU  - Geißdörfer, Stefan 
AU  - Putz, Alexander 
AU  - Engel, Ulf 
PY  - 2017/08/18
TI  - Microforming  Current Status and Future Demands
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 52, No 7-8 (2006): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - microforming, current status, future demands, 
N2  - Microforming technology is gaining increasing interest from the metal-forming community. This can be explained by the large number of new applications and products delivered to market in the past, yielding smaller and smaller geometrical dimensions of the final products and thus demanding the smallest specimens to be manufactured in large quantities. Up to now, most of these parts were being manufactured by machining technology, well suited to the production of small series. The analysis of the current market situation shows that the steadily increasing trend towards the smallest products is continuing in the future and thus requires new manufacturing technologies for large-quantity production. Forming technology seems to be well suited due to its high production output and high accuracy. The aim of this paper is to give an overview of the current research activities related to microforming technology, showing microforming technology’s capabilities and problems. The analysis of the current status will give a hint to existing gaps in knowledge and finally describe the future demands.
UR  - https://www.sv-jme.eu/article/microforming-current-status-and-future-demands/
Geißdörfer, Stefan, Putz, Alexander, AND Engel, Ulf.
"Microforming  Current Status and Future Demands" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 52 Number 7-8 (18 August 2017)

Authors

Affiliations

  • University of Erlangen-Nuremberg, Germany
  • University of Erlangen-Nuremberg, Germany
  • University of Erlangen-Nuremberg, Germany

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 52(2006)7-8, 495-505
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

Microforming technology is gaining increasing interest from the metal-forming community. This can be explained by the large number of new applications and products delivered to market in the past, yielding smaller and smaller geometrical dimensions of the final products and thus demanding the smallest specimens to be manufactured in large quantities. Up to now, most of these parts were being manufactured by machining technology, well suited to the production of small series. The analysis of the current market situation shows that the steadily increasing trend towards the smallest products is continuing in the future and thus requires new manufacturing technologies for large-quantity production. Forming technology seems to be well suited due to its high production output and high accuracy. The aim of this paper is to give an overview of the current research activities related to microforming technology, showing microforming technology’s capabilities and problems. The analysis of the current status will give a hint to existing gaps in knowledge and finally describe the future demands.

microforming; current status; future demands;