Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating

643 Views
230 Downloads
Export citation: ABNT
SOKOVIĆ, Mirko .
Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 43, n.3-4, p. 129-136, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/model-of-improvement-of-cerment-tool-performance-by-tin-pvd-coating/>. Date accessed: 19 feb. 2020. 
doi:http://dx.doi.org/.
Soković, M.
(1997).
Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating.
Strojniški vestnik - Journal of Mechanical Engineering, 43(3-4), 129-136.
doi:http://dx.doi.org/
@article{.,
	author = {Mirko  Soković},
	title = {Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {43},
	number = {3-4},
	year = {1997},
	keywords = {cermets; TiN caotings; tribological systems; machinability tests; CTE index; },
	abstract = {The last decade was characterised by the introduction of PVD-coated cutting tools, which now hold a large share of the cutting tool market. Wear resistant PVD (Physical Vapour Deposition) coatings (TiN, TiCN and TiAlN) are regularly used to improve HSS (High Speed Steel) , ASP (Anty Segregation Process) and hardmetal tools in industrial practice today. A few years ago the first PVD coated cermet appeared on the market. Since a large number of factors contribute to the efficiency of hard coatings on cutting tools, these factors were analysed mainly from the of product quality improvement point of view. However the efficiency of PVD coatings depends greatly on the adhesion to the substrate and on the wear resistance. A new mode for estimation o f coated cutting tools is proposed: i.e. the coated tool efficiency (CTE) index. The present paper deals with the development of the model of complex performance optimisation of PVD-coated cermet tools in order to produce the expected or required high quality products.},
	issn = {0039-2480},	pages = {129-136},	doi = {},
	url = {https://www.sv-jme.eu/article/model-of-improvement-of-cerment-tool-performance-by-tin-pvd-coating/}
}
Soković, M.
1997 July 43. Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 43:3-4
%A Soković, Mirko 
%D 1997
%T Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating
%B 1997
%9 cermets; TiN caotings; tribological systems; machinability tests; CTE index; 
%! Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating
%K cermets; TiN caotings; tribological systems; machinability tests; CTE index; 
%X The last decade was characterised by the introduction of PVD-coated cutting tools, which now hold a large share of the cutting tool market. Wear resistant PVD (Physical Vapour Deposition) coatings (TiN, TiCN and TiAlN) are regularly used to improve HSS (High Speed Steel) , ASP (Anty Segregation Process) and hardmetal tools in industrial practice today. A few years ago the first PVD coated cermet appeared on the market. Since a large number of factors contribute to the efficiency of hard coatings on cutting tools, these factors were analysed mainly from the of product quality improvement point of view. However the efficiency of PVD coatings depends greatly on the adhesion to the substrate and on the wear resistance. A new mode for estimation o f coated cutting tools is proposed: i.e. the coated tool efficiency (CTE) index. The present paper deals with the development of the model of complex performance optimisation of PVD-coated cermet tools in order to produce the expected or required high quality products.
%U https://www.sv-jme.eu/article/model-of-improvement-of-cerment-tool-performance-by-tin-pvd-coating/
%0 Journal Article
%R 
%& 129
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 43
%N 3-4
%@ 0039-2480
%8 2017-07-06
%7 2017-07-06
Soković, Mirko.
"Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating." Strojniški vestnik - Journal of Mechanical Engineering [Online], 43.3-4 (1997): 129-136. Web.  19 Feb. 2020
TY  - JOUR
AU  - Soković, Mirko 
PY  - 1997
TI  - Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - cermets; TiN caotings; tribological systems; machinability tests; CTE index; 
N2  - The last decade was characterised by the introduction of PVD-coated cutting tools, which now hold a large share of the cutting tool market. Wear resistant PVD (Physical Vapour Deposition) coatings (TiN, TiCN and TiAlN) are regularly used to improve HSS (High Speed Steel) , ASP (Anty Segregation Process) and hardmetal tools in industrial practice today. A few years ago the first PVD coated cermet appeared on the market. Since a large number of factors contribute to the efficiency of hard coatings on cutting tools, these factors were analysed mainly from the of product quality improvement point of view. However the efficiency of PVD coatings depends greatly on the adhesion to the substrate and on the wear resistance. A new mode for estimation o f coated cutting tools is proposed: i.e. the coated tool efficiency (CTE) index. The present paper deals with the development of the model of complex performance optimisation of PVD-coated cermet tools in order to produce the expected or required high quality products.
UR  - https://www.sv-jme.eu/article/model-of-improvement-of-cerment-tool-performance-by-tin-pvd-coating/
@article{{}{.},
	author = {Soković, M.},
	title = {Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {43},
	number = {3-4},
	year = {1997},
	doi = {},
	url = {https://www.sv-jme.eu/article/model-of-improvement-of-cerment-tool-performance-by-tin-pvd-coating/}
}
TY  - JOUR
AU  - Soković, Mirko 
PY  - 2017/07/06
TI  - Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 43, No 3-4 (1997): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - cermets, TiN caotings, tribological systems, machinability tests, CTE index, 
N2  - The last decade was characterised by the introduction of PVD-coated cutting tools, which now hold a large share of the cutting tool market. Wear resistant PVD (Physical Vapour Deposition) coatings (TiN, TiCN and TiAlN) are regularly used to improve HSS (High Speed Steel) , ASP (Anty Segregation Process) and hardmetal tools in industrial practice today. A few years ago the first PVD coated cermet appeared on the market. Since a large number of factors contribute to the efficiency of hard coatings on cutting tools, these factors were analysed mainly from the of product quality improvement point of view. However the efficiency of PVD coatings depends greatly on the adhesion to the substrate and on the wear resistance. A new mode for estimation o f coated cutting tools is proposed: i.e. the coated tool efficiency (CTE) index. The present paper deals with the development of the model of complex performance optimisation of PVD-coated cermet tools in order to produce the expected or required high quality products.
UR  - https://www.sv-jme.eu/article/model-of-improvement-of-cerment-tool-performance-by-tin-pvd-coating/
Soković, Mirko"Model of Improvement of Cerment Tool Performance by TiN (PVD) Coating" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 43 Number 3-4 (06 July 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 43(1997)3-4, 129-136

The last decade was characterised by the introduction of PVD-coated cutting tools, which now hold a large share of the cutting tool market. Wear resistant PVD (Physical Vapour Deposition) coatings (TiN, TiCN and TiAlN) are regularly used to improve HSS (High Speed Steel) , ASP (Anty Segregation Process) and hardmetal tools in industrial practice today. A few years ago the first PVD coated cermet appeared on the market. Since a large number of factors contribute to the efficiency of hard coatings on cutting tools, these factors were analysed mainly from the of product quality improvement point of view. However the efficiency of PVD coatings depends greatly on the adhesion to the substrate and on the wear resistance. A new mode for estimation o f coated cutting tools is proposed: i.e. the coated tool efficiency (CTE) index. The present paper deals with the development of the model of complex performance optimisation of PVD-coated cermet tools in order to produce the expected or required high quality products.

cermets; TiN caotings; tribological systems; machinability tests; CTE index;