MILECKI, Andrzej ;RYBARCZYK, Dominik . Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.9, p. 517-522, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/modelling-of-an-electrohydraulic-proportional-valve-with-a-synchronous-motor/>. Date accessed: 15 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2015.2553.
Milecki, A., & Rybarczyk, D. (2015). Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor. Strojniški vestnik - Journal of Mechanical Engineering, 61(9), 517-522. doi:http://dx.doi.org/10.5545/sv-jme.2015.2553
@article{sv-jmesv-jme.2015.2553, author = {Andrzej Milecki and Dominik Rybarczyk}, title = {Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {9}, year = {2015}, keywords = {proportional valve, electrohydraulic, synchronous motor}, abstract = {This paper presents the design of proportional valve with a Permanent Magnet Synchronous Motor (PMSM). The proposed valve is described, and its history is briefly reviewed. Basic equations describing the valve are formulated and its simulation model is implemented in MATLABSimulink software. Selected nonlinearities are included in this model. In order to determine the basic parameters of the discussed proportional valve, a test stand is built, which enables valve investigations. In this test stand, a valve control system based on programmable logic controller (PLC) with a touch panel and inverter module is implemented and used for investigations. The valve flow characteristics and step responses obtained in simulations are presented. These characteristics are compared with results obtained in experimental investigations. As a result, the valve simulation model is modified and improved.}, issn = {0039-2480}, pages = {517-522}, doi = {10.5545/sv-jme.2015.2553}, url = {https://www.sv-jme.eu/article/modelling-of-an-electrohydraulic-proportional-valve-with-a-synchronous-motor/} }
Milecki, A.,Rybarczyk, D. 2015 June 61. Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:9
%A Milecki, Andrzej %A Rybarczyk, Dominik %D 2015 %T Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor %B 2015 %9 proportional valve, electrohydraulic, synchronous motor %! Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor %K proportional valve, electrohydraulic, synchronous motor %X This paper presents the design of proportional valve with a Permanent Magnet Synchronous Motor (PMSM). The proposed valve is described, and its history is briefly reviewed. Basic equations describing the valve are formulated and its simulation model is implemented in MATLABSimulink software. Selected nonlinearities are included in this model. In order to determine the basic parameters of the discussed proportional valve, a test stand is built, which enables valve investigations. In this test stand, a valve control system based on programmable logic controller (PLC) with a touch panel and inverter module is implemented and used for investigations. The valve flow characteristics and step responses obtained in simulations are presented. These characteristics are compared with results obtained in experimental investigations. As a result, the valve simulation model is modified and improved. %U https://www.sv-jme.eu/article/modelling-of-an-electrohydraulic-proportional-valve-with-a-synchronous-motor/ %0 Journal Article %R 10.5545/sv-jme.2015.2553 %& 517 %P 6 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 9 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Milecki, Andrzej, & Dominik Rybarczyk. "Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.9 (2015): 517-522. Web. 15 Oct. 2024
TY - JOUR AU - Milecki, Andrzej AU - Rybarczyk, Dominik PY - 2015 TI - Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2553 KW - proportional valve, electrohydraulic, synchronous motor N2 - This paper presents the design of proportional valve with a Permanent Magnet Synchronous Motor (PMSM). The proposed valve is described, and its history is briefly reviewed. Basic equations describing the valve are formulated and its simulation model is implemented in MATLABSimulink software. Selected nonlinearities are included in this model. In order to determine the basic parameters of the discussed proportional valve, a test stand is built, which enables valve investigations. In this test stand, a valve control system based on programmable logic controller (PLC) with a touch panel and inverter module is implemented and used for investigations. The valve flow characteristics and step responses obtained in simulations are presented. These characteristics are compared with results obtained in experimental investigations. As a result, the valve simulation model is modified and improved. UR - https://www.sv-jme.eu/article/modelling-of-an-electrohydraulic-proportional-valve-with-a-synchronous-motor/
@article{{sv-jme}{sv-jme.2015.2553}, author = {Milecki, A., Rybarczyk, D.}, title = {Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {9}, year = {2015}, doi = {10.5545/sv-jme.2015.2553}, url = {https://www.sv-jme.eu/article/modelling-of-an-electrohydraulic-proportional-valve-with-a-synchronous-motor/} }
TY - JOUR AU - Milecki, Andrzej AU - Rybarczyk, Dominik PY - 2018/06/27 TI - Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 9 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2553 KW - proportional valve, electrohydraulic, synchronous motor N2 - This paper presents the design of proportional valve with a Permanent Magnet Synchronous Motor (PMSM). The proposed valve is described, and its history is briefly reviewed. Basic equations describing the valve are formulated and its simulation model is implemented in MATLABSimulink software. Selected nonlinearities are included in this model. In order to determine the basic parameters of the discussed proportional valve, a test stand is built, which enables valve investigations. In this test stand, a valve control system based on programmable logic controller (PLC) with a touch panel and inverter module is implemented and used for investigations. The valve flow characteristics and step responses obtained in simulations are presented. These characteristics are compared with results obtained in experimental investigations. As a result, the valve simulation model is modified and improved. UR - https://www.sv-jme.eu/article/modelling-of-an-electrohydraulic-proportional-valve-with-a-synchronous-motor/
Milecki, Andrzej, AND Rybarczyk, Dominik. "Modelling of an Electrohydraulic Proportional Valve with a Synchronous Motor" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 9 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)9, 517-522
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper presents the design of proportional valve with a Permanent Magnet Synchronous Motor (PMSM). The proposed valve is described, and its history is briefly reviewed. Basic equations describing the valve are formulated and its simulation model is implemented in MATLABSimulink software. Selected nonlinearities are included in this model. In order to determine the basic parameters of the discussed proportional valve, a test stand is built, which enables valve investigations. In this test stand, a valve control system based on programmable logic controller (PLC) with a touch panel and inverter module is implemented and used for investigations. The valve flow characteristics and step responses obtained in simulations are presented. These characteristics are compared with results obtained in experimental investigations. As a result, the valve simulation model is modified and improved.