Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges

2305 Views
1931 Downloads
Export citation: ABNT
LI, Guohe ;CAI, Yujun ;QI, Houjun .
Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.11, p. 673-682, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/modelling-on-relationship-of-adiabatic-shear-and-cutting-conditions-in-high-speed-machining/>. Date accessed: 10 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2017.4443.
Li, G., Cai, Y., & Qi, H.
(2017).
Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges.
Strojniški vestnik - Journal of Mechanical Engineering, 63(11), 673-682.
doi:http://dx.doi.org/10.5545/sv-jme.2017.4443
@article{sv-jmesv-jme.2017.4443,
	author = {Guohe  Li and Yujun  Cai and Houjun  Qi},
	title = {Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {11},
	year = {2017},
	keywords = {high speed machining; adiabatic shear; linear perturbation analysis; cutting parameter},
	abstract = {The serrated chip is a typical characteristic of high-speed cutting due to the occurrence of adiabatic shear. Based on an adiabatic shear sensitivity index proposed via linear perturbation analysis, which considers the pressure-shear condition in machining, the relationship of adiabatic shear and cutting conditions is established. The corresponding relation between the cutting conditions and the deformation conditions is established based on the model of a parallel boundary shear zone. The influence of cutting parameter on adiabatic shear is analysed, and the results show that the adiabatic shear in high speed machining tends to occur under the condition of higher cutting speed, greater depth of cut and smaller rake angle. An orthogonal cutting experiment was performed to validate the proposed model. Furthermore, the influence mechanism of cutting conditions on adiabatic shear is discussed in detail, and one application of the model is introduced.},
	issn = {0039-2480},	pages = {673-682},	doi = {10.5545/sv-jme.2017.4443},
	url = {https://www.sv-jme.eu/article/modelling-on-relationship-of-adiabatic-shear-and-cutting-conditions-in-high-speed-machining/}
}
Li, G.,Cai, Y.,Qi, H.
2017 June 63. Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:11
%A Li, Guohe 
%A Cai, Yujun 
%A Qi, Houjun 
%D 2017
%T Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges
%B 2017
%9 high speed machining; adiabatic shear; linear perturbation analysis; cutting parameter
%! Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges
%K high speed machining; adiabatic shear; linear perturbation analysis; cutting parameter
%X The serrated chip is a typical characteristic of high-speed cutting due to the occurrence of adiabatic shear. Based on an adiabatic shear sensitivity index proposed via linear perturbation analysis, which considers the pressure-shear condition in machining, the relationship of adiabatic shear and cutting conditions is established. The corresponding relation between the cutting conditions and the deformation conditions is established based on the model of a parallel boundary shear zone. The influence of cutting parameter on adiabatic shear is analysed, and the results show that the adiabatic shear in high speed machining tends to occur under the condition of higher cutting speed, greater depth of cut and smaller rake angle. An orthogonal cutting experiment was performed to validate the proposed model. Furthermore, the influence mechanism of cutting conditions on adiabatic shear is discussed in detail, and one application of the model is introduced.
%U https://www.sv-jme.eu/article/modelling-on-relationship-of-adiabatic-shear-and-cutting-conditions-in-high-speed-machining/
%0 Journal Article
%R 10.5545/sv-jme.2017.4443
%& 673
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 63
%N 11
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27
Li, Guohe, Yujun  Cai, & Houjun  Qi.
"Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.11 (2017): 673-682. Web.  10 Dec. 2024
TY  - JOUR
AU  - Li, Guohe 
AU  - Cai, Yujun 
AU  - Qi, Houjun 
PY  - 2017
TI  - Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4443
KW  - high speed machining; adiabatic shear; linear perturbation analysis; cutting parameter
N2  - The serrated chip is a typical characteristic of high-speed cutting due to the occurrence of adiabatic shear. Based on an adiabatic shear sensitivity index proposed via linear perturbation analysis, which considers the pressure-shear condition in machining, the relationship of adiabatic shear and cutting conditions is established. The corresponding relation between the cutting conditions and the deformation conditions is established based on the model of a parallel boundary shear zone. The influence of cutting parameter on adiabatic shear is analysed, and the results show that the adiabatic shear in high speed machining tends to occur under the condition of higher cutting speed, greater depth of cut and smaller rake angle. An orthogonal cutting experiment was performed to validate the proposed model. Furthermore, the influence mechanism of cutting conditions on adiabatic shear is discussed in detail, and one application of the model is introduced.
UR  - https://www.sv-jme.eu/article/modelling-on-relationship-of-adiabatic-shear-and-cutting-conditions-in-high-speed-machining/
@article{{sv-jme}{sv-jme.2017.4443},
	author = {Li, G., Cai, Y., Qi, H.},
	title = {Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {11},
	year = {2017},
	doi = {10.5545/sv-jme.2017.4443},
	url = {https://www.sv-jme.eu/article/modelling-on-relationship-of-adiabatic-shear-and-cutting-conditions-in-high-speed-machining/}
}
TY  - JOUR
AU  - Li, Guohe 
AU  - Cai, Yujun 
AU  - Qi, Houjun 
PY  - 2018/06/27
TI  - Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 11 (2017): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4443
KW  - high speed machining, adiabatic shear, linear perturbation analysis, cutting parameter
N2  - The serrated chip is a typical characteristic of high-speed cutting due to the occurrence of adiabatic shear. Based on an adiabatic shear sensitivity index proposed via linear perturbation analysis, which considers the pressure-shear condition in machining, the relationship of adiabatic shear and cutting conditions is established. The corresponding relation between the cutting conditions and the deformation conditions is established based on the model of a parallel boundary shear zone. The influence of cutting parameter on adiabatic shear is analysed, and the results show that the adiabatic shear in high speed machining tends to occur under the condition of higher cutting speed, greater depth of cut and smaller rake angle. An orthogonal cutting experiment was performed to validate the proposed model. Furthermore, the influence mechanism of cutting conditions on adiabatic shear is discussed in detail, and one application of the model is introduced.
UR  - https://www.sv-jme.eu/article/modelling-on-relationship-of-adiabatic-shear-and-cutting-conditions-in-high-speed-machining/
Li, Guohe, Cai, Yujun, AND Qi, Houjun.
"Modelling of the Relationship of Adiabatic Shear and Cutting Conditions for Higher Cutting Speed Ranges" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 11 (27 June 2018)

Authors

Affiliations

  • Tianjin University of Technology & Education, Tianjin key laboratory of high-speed cutting & precision machining, China 1

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 63(2017)11, 673-682
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2017.4443

The serrated chip is a typical characteristic of high-speed cutting due to the occurrence of adiabatic shear. Based on an adiabatic shear sensitivity index proposed via linear perturbation analysis, which considers the pressure-shear condition in machining, the relationship of adiabatic shear and cutting conditions is established. The corresponding relation between the cutting conditions and the deformation conditions is established based on the model of a parallel boundary shear zone. The influence of cutting parameter on adiabatic shear is analysed, and the results show that the adiabatic shear in high speed machining tends to occur under the condition of higher cutting speed, greater depth of cut and smaller rake angle. An orthogonal cutting experiment was performed to validate the proposed model. Furthermore, the influence mechanism of cutting conditions on adiabatic shear is discussed in detail, and one application of the model is introduced.

high speed machining; adiabatic shear; linear perturbation analysis; cutting parameter