PEPELNJAK, Tomaž ;JURKOŠEK, Boris ;KUZMAN, Karl . Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 43, n.9-10, p. 415-426, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/modern-market-adaptable-development-and-manufacturing-of-new-modular-sheet-parts/>. Date accessed: 26 apr. 2024. doi:http://dx.doi.org/.
Pepelnjak, T., Jurkošek, B., & Kuzman, K. (1997). Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts. Strojniški vestnik - Journal of Mechanical Engineering, 43(9-10), 415-426. doi:http://dx.doi.org/
@article{.,
author = {Tomaž Pepelnjak and Boris Jurkošek and Karl Kuzman},
title = {Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {43},
number = {9-10},
year = {1997},
keywords = {sheet; etal forming; modular concepts; FMEA method; product marketing; },
abstract = {Modern integrated systems for the development and manufacturing of new products require cooperation between all services involved in this process. The design of new products to meet the market demands has to be performed according to its expected price through cooperation between the designer and the production engineer in order to achieve optimum part geometry according to available manufacturing technologies. To achieve optimum strength with minimum material use, the introduction of tailored blanks into the production process is recommended. Therefore, the concept and design of the product have to be prepared entirety in a virtual environment (CA-x), and this is made possible through powerful computer tools. The output of the virtual CA-x environment is a data file containing the geometrical and technological information about the new part. This file has to be transferred to the prototyping workshop or tooling plant. The prototyping workshop is supported by modern concepts and technologies of rapid prototyping and/or tooling. This enables the manufacturing of prototypes and zero-series in the shortest possible time. In the case of forming process optimization, tool reconstruction is possible through a layered tooling concept. Good cooperation between all the participants involved in the conceptual phase and development of a new product, gathering information and evaluation of possible failures in all development phases (FMEA) and their elimination before the test-series helps to shorten development times. The cost minimization of possible product failures, which could appear in the production, is also significant. The paper presents a model of integral linkage of development, manufacturing and marketing, which differs from the systems known to date, particularly since it includes feed-back information loops. These serve for responding to rapid market changes and adapting the selection process for developmental and manufacturing technologies in order to master and make new products or reconstruct the existing ones. The research work has shown that all development phases are successfully linked. Modern development concepts tend towards the further spreading of the global linkage of the development phases with manufacturing and current trade methods which are made possible through new communication media, such as computer sale catalogues, the internet and product presentation in virtual reality.},
issn = {0039-2480}, pages = {415-426}, doi = {},
url = {https://www.sv-jme.eu/article/modern-market-adaptable-development-and-manufacturing-of-new-modular-sheet-parts/}
}
Pepelnjak, T.,Jurkošek, B.,Kuzman, K. 1997 November 43. Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 43:9-10
%A Pepelnjak, Tomaž %A Jurkošek, Boris %A Kuzman, Karl %D 1997 %T Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts %B 1997 %9 sheet; etal forming; modular concepts; FMEA method; product marketing; %! Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts %K sheet; etal forming; modular concepts; FMEA method; product marketing; %X Modern integrated systems for the development and manufacturing of new products require cooperation between all services involved in this process. The design of new products to meet the market demands has to be performed according to its expected price through cooperation between the designer and the production engineer in order to achieve optimum part geometry according to available manufacturing technologies. To achieve optimum strength with minimum material use, the introduction of tailored blanks into the production process is recommended. Therefore, the concept and design of the product have to be prepared entirety in a virtual environment (CA-x), and this is made possible through powerful computer tools. The output of the virtual CA-x environment is a data file containing the geometrical and technological information about the new part. This file has to be transferred to the prototyping workshop or tooling plant. The prototyping workshop is supported by modern concepts and technologies of rapid prototyping and/or tooling. This enables the manufacturing of prototypes and zero-series in the shortest possible time. In the case of forming process optimization, tool reconstruction is possible through a layered tooling concept. Good cooperation between all the participants involved in the conceptual phase and development of a new product, gathering information and evaluation of possible failures in all development phases (FMEA) and their elimination before the test-series helps to shorten development times. The cost minimization of possible product failures, which could appear in the production, is also significant. The paper presents a model of integral linkage of development, manufacturing and marketing, which differs from the systems known to date, particularly since it includes feed-back information loops. These serve for responding to rapid market changes and adapting the selection process for developmental and manufacturing technologies in order to master and make new products or reconstruct the existing ones. The research work has shown that all development phases are successfully linked. Modern development concepts tend towards the further spreading of the global linkage of the development phases with manufacturing and current trade methods which are made possible through new communication media, such as computer sale catalogues, the internet and product presentation in virtual reality. %U https://www.sv-jme.eu/article/modern-market-adaptable-development-and-manufacturing-of-new-modular-sheet-parts/ %0 Journal Article %R %& 415 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 43 %N 9-10 %@ 0039-2480 %8 2017-11-11 %7 2017-11-11
Pepelnjak, Tomaž, Boris Jurkošek, & Karl Kuzman. "Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts." Strojniški vestnik - Journal of Mechanical Engineering [Online], 43.9-10 (1997): 415-426. Web. 26 Apr. 2024
TY - JOUR AU - Pepelnjak, Tomaž AU - Jurkošek, Boris AU - Kuzman, Karl PY - 1997 TI - Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - sheet; etal forming; modular concepts; FMEA method; product marketing; N2 - Modern integrated systems for the development and manufacturing of new products require cooperation between all services involved in this process. The design of new products to meet the market demands has to be performed according to its expected price through cooperation between the designer and the production engineer in order to achieve optimum part geometry according to available manufacturing technologies. To achieve optimum strength with minimum material use, the introduction of tailored blanks into the production process is recommended. Therefore, the concept and design of the product have to be prepared entirety in a virtual environment (CA-x), and this is made possible through powerful computer tools. The output of the virtual CA-x environment is a data file containing the geometrical and technological information about the new part. This file has to be transferred to the prototyping workshop or tooling plant. The prototyping workshop is supported by modern concepts and technologies of rapid prototyping and/or tooling. This enables the manufacturing of prototypes and zero-series in the shortest possible time. In the case of forming process optimization, tool reconstruction is possible through a layered tooling concept. Good cooperation between all the participants involved in the conceptual phase and development of a new product, gathering information and evaluation of possible failures in all development phases (FMEA) and their elimination before the test-series helps to shorten development times. The cost minimization of possible product failures, which could appear in the production, is also significant. The paper presents a model of integral linkage of development, manufacturing and marketing, which differs from the systems known to date, particularly since it includes feed-back information loops. These serve for responding to rapid market changes and adapting the selection process for developmental and manufacturing technologies in order to master and make new products or reconstruct the existing ones. The research work has shown that all development phases are successfully linked. Modern development concepts tend towards the further spreading of the global linkage of the development phases with manufacturing and current trade methods which are made possible through new communication media, such as computer sale catalogues, the internet and product presentation in virtual reality. UR - https://www.sv-jme.eu/article/modern-market-adaptable-development-and-manufacturing-of-new-modular-sheet-parts/
@article{{}{.},
author = {Pepelnjak, T., Jurkošek, B., Kuzman, K.},
title = {Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {43},
number = {9-10},
year = {1997},
doi = {},
url = {https://www.sv-jme.eu/article/modern-market-adaptable-development-and-manufacturing-of-new-modular-sheet-parts/}
}
TY - JOUR AU - Pepelnjak, Tomaž AU - Jurkošek, Boris AU - Kuzman, Karl PY - 2017/11/11 TI - Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 43, No 9-10 (1997): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - sheet, etal forming, modular concepts, FMEA method, product marketing, N2 - Modern integrated systems for the development and manufacturing of new products require cooperation between all services involved in this process. The design of new products to meet the market demands has to be performed according to its expected price through cooperation between the designer and the production engineer in order to achieve optimum part geometry according to available manufacturing technologies. To achieve optimum strength with minimum material use, the introduction of tailored blanks into the production process is recommended. Therefore, the concept and design of the product have to be prepared entirety in a virtual environment (CA-x), and this is made possible through powerful computer tools. The output of the virtual CA-x environment is a data file containing the geometrical and technological information about the new part. This file has to be transferred to the prototyping workshop or tooling plant. The prototyping workshop is supported by modern concepts and technologies of rapid prototyping and/or tooling. This enables the manufacturing of prototypes and zero-series in the shortest possible time. In the case of forming process optimization, tool reconstruction is possible through a layered tooling concept. Good cooperation between all the participants involved in the conceptual phase and development of a new product, gathering information and evaluation of possible failures in all development phases (FMEA) and their elimination before the test-series helps to shorten development times. The cost minimization of possible product failures, which could appear in the production, is also significant. The paper presents a model of integral linkage of development, manufacturing and marketing, which differs from the systems known to date, particularly since it includes feed-back information loops. These serve for responding to rapid market changes and adapting the selection process for developmental and manufacturing technologies in order to master and make new products or reconstruct the existing ones. The research work has shown that all development phases are successfully linked. Modern development concepts tend towards the further spreading of the global linkage of the development phases with manufacturing and current trade methods which are made possible through new communication media, such as computer sale catalogues, the internet and product presentation in virtual reality. UR - https://www.sv-jme.eu/article/modern-market-adaptable-development-and-manufacturing-of-new-modular-sheet-parts/
Pepelnjak, Tomaž, Jurkošek, Boris, AND Kuzman, Karl. "Modern Market Adaptable Development and Manufacturing of New Modular Sheet Metal Parts" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 43 Number 9-10 (11 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 43(1997)9-10, 415-426
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Modern integrated systems for the development and manufacturing of new products require cooperation between all services involved in this process. The design of new products to meet the market demands has to be performed according to its expected price through cooperation between the designer and the production engineer in order to achieve optimum part geometry according to available manufacturing technologies. To achieve optimum strength with minimum material use, the introduction of tailored blanks into the production process is recommended. Therefore, the concept and design of the product have to be prepared entirety in a virtual environment (CA-x), and this is made possible through powerful computer tools. The output of the virtual CA-x environment is a data file containing the geometrical and technological information about the new part. This file has to be transferred to the prototyping workshop or tooling plant. The prototyping workshop is supported by modern concepts and technologies of rapid prototyping and/or tooling. This enables the manufacturing of prototypes and zero-series in the shortest possible time. In the case of forming process optimization, tool reconstruction is possible through a layered tooling concept. Good cooperation between all the participants involved in the conceptual phase and development of a new product, gathering information and evaluation of possible failures in all development phases (FMEA) and their elimination before the test-series helps to shorten development times. The cost minimization of possible product failures, which could appear in the production, is also significant. The paper presents a model of integral linkage of development, manufacturing and marketing, which differs from the systems known to date, particularly since it includes feed-back information loops. These serve for responding to rapid market changes and adapting the selection process for developmental and manufacturing technologies in order to master and make new products or reconstruct the existing ones. The research work has shown that all development phases are successfully linked. Modern development concepts tend towards the further spreading of the global linkage of the development phases with manufacturing and current trade methods which are made possible through new communication media, such as computer sale catalogues, the internet and product presentation in virtual reality.