NDT Based Process Monitoring and Control

2109 Views
2302 Downloads
Export citation: ABNT
WOLTER, Bernd ;DOBMANN, Gerd ;BOLLER, Christian .
NDT Based Process Monitoring and Control. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.3, p. 218-226, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/ndt-based-process-monitoring-and-control/>. Date accessed: 28 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2010.172.
Wolter, B., Dobmann, G., & Boller, C.
(2011).
NDT Based Process Monitoring and Control.
Strojniški vestnik - Journal of Mechanical Engineering, 57(3), 218-226.
doi:http://dx.doi.org/10.5545/sv-jme.2010.172
@article{sv-jmesv-jme.2010.172,
	author = {Bernd  Wolter and Gerd  Dobmann and Christian  Boller},
	title = {NDT Based Process Monitoring and Control},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {3},
	year = {2011},
	keywords = {automation; mechanical material properties; micro-magnetic method; microwaves; nondestructive testing (NDT); process integrated NDT; process control; process monitoring; residual stress; tool-integrated sensor; ultrasound},
	abstract = {The old focus on using automation was simply to increase productivity and reduce costs. Today, the purpose of automation has shifted to broader issues. Highly automated processes ensure high quality on a constant level, if it is connected with a high degree of (automated) monitoring and control. Meanwhile, continuous process and quality monitoring by non-destructive testing (NDT) is an accepted procedure to early diagnosis of irregular process conditions, followed by an NDT-based feed back control and optimization. Consequently, the development of process integrated NDT is an important scientific task. Such developments have to fulfil the requirements of today’s industrial production concerning integrability, automation, speed, reliability and profitability. Flat steel production and processing, gas assisted injection moulding and cold joining processes are some examples of a successful application of the processintegrated NDT.},
	issn = {0039-2480},	pages = {218-226},	doi = {10.5545/sv-jme.2010.172},
	url = {https://www.sv-jme.eu/article/ndt-based-process-monitoring-and-control/}
}
Wolter, B.,Dobmann, G.,Boller, C.
2011 June 57. NDT Based Process Monitoring and Control. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:3
%A Wolter, Bernd 
%A Dobmann, Gerd 
%A Boller, Christian 
%D 2011
%T NDT Based Process Monitoring and Control
%B 2011
%9 automation; mechanical material properties; micro-magnetic method; microwaves; nondestructive testing (NDT); process integrated NDT; process control; process monitoring; residual stress; tool-integrated sensor; ultrasound
%! NDT Based Process Monitoring and Control
%K automation; mechanical material properties; micro-magnetic method; microwaves; nondestructive testing (NDT); process integrated NDT; process control; process monitoring; residual stress; tool-integrated sensor; ultrasound
%X The old focus on using automation was simply to increase productivity and reduce costs. Today, the purpose of automation has shifted to broader issues. Highly automated processes ensure high quality on a constant level, if it is connected with a high degree of (automated) monitoring and control. Meanwhile, continuous process and quality monitoring by non-destructive testing (NDT) is an accepted procedure to early diagnosis of irregular process conditions, followed by an NDT-based feed back control and optimization. Consequently, the development of process integrated NDT is an important scientific task. Such developments have to fulfil the requirements of today’s industrial production concerning integrability, automation, speed, reliability and profitability. Flat steel production and processing, gas assisted injection moulding and cold joining processes are some examples of a successful application of the processintegrated NDT.
%U https://www.sv-jme.eu/article/ndt-based-process-monitoring-and-control/
%0 Journal Article
%R 10.5545/sv-jme.2010.172
%& 218
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 57
%N 3
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Wolter, Bernd, Gerd  Dobmann, & Christian  Boller.
"NDT Based Process Monitoring and Control." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.3 (2011): 218-226. Web.  28 Mar. 2024
TY  - JOUR
AU  - Wolter, Bernd 
AU  - Dobmann, Gerd 
AU  - Boller, Christian 
PY  - 2011
TI  - NDT Based Process Monitoring and Control
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.172
KW  - automation; mechanical material properties; micro-magnetic method; microwaves; nondestructive testing (NDT); process integrated NDT; process control; process monitoring; residual stress; tool-integrated sensor; ultrasound
N2  - The old focus on using automation was simply to increase productivity and reduce costs. Today, the purpose of automation has shifted to broader issues. Highly automated processes ensure high quality on a constant level, if it is connected with a high degree of (automated) monitoring and control. Meanwhile, continuous process and quality monitoring by non-destructive testing (NDT) is an accepted procedure to early diagnosis of irregular process conditions, followed by an NDT-based feed back control and optimization. Consequently, the development of process integrated NDT is an important scientific task. Such developments have to fulfil the requirements of today’s industrial production concerning integrability, automation, speed, reliability and profitability. Flat steel production and processing, gas assisted injection moulding and cold joining processes are some examples of a successful application of the processintegrated NDT.
UR  - https://www.sv-jme.eu/article/ndt-based-process-monitoring-and-control/
@article{{sv-jme}{sv-jme.2010.172},
	author = {Wolter, B., Dobmann, G., Boller, C.},
	title = {NDT Based Process Monitoring and Control},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {3},
	year = {2011},
	doi = {10.5545/sv-jme.2010.172},
	url = {https://www.sv-jme.eu/article/ndt-based-process-monitoring-and-control/}
}
TY  - JOUR
AU  - Wolter, Bernd 
AU  - Dobmann, Gerd 
AU  - Boller, Christian 
PY  - 2018/06/28
TI  - NDT Based Process Monitoring and Control
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 3 (2011): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.172
KW  - automation, mechanical material properties, micro-magnetic method, microwaves, nondestructive testing (NDT), process integrated NDT, process control, process monitoring, residual stress, tool-integrated sensor, ultrasound
N2  - The old focus on using automation was simply to increase productivity and reduce costs. Today, the purpose of automation has shifted to broader issues. Highly automated processes ensure high quality on a constant level, if it is connected with a high degree of (automated) monitoring and control. Meanwhile, continuous process and quality monitoring by non-destructive testing (NDT) is an accepted procedure to early diagnosis of irregular process conditions, followed by an NDT-based feed back control and optimization. Consequently, the development of process integrated NDT is an important scientific task. Such developments have to fulfil the requirements of today’s industrial production concerning integrability, automation, speed, reliability and profitability. Flat steel production and processing, gas assisted injection moulding and cold joining processes are some examples of a successful application of the processintegrated NDT.
UR  - https://www.sv-jme.eu/article/ndt-based-process-monitoring-and-control/
Wolter, Bernd, Dobmann, Gerd, AND Boller, Christian.
"NDT Based Process Monitoring and Control" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 3 (28 June 2018)

Authors

Affiliations

  • Fraunhofer Institute for Non-destructive testing, 218 Campus E3 1, D-66123 Saarbruecken 1

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 57(2011)3, 218-226
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2010.172

The old focus on using automation was simply to increase productivity and reduce costs. Today, the purpose of automation has shifted to broader issues. Highly automated processes ensure high quality on a constant level, if it is connected with a high degree of (automated) monitoring and control. Meanwhile, continuous process and quality monitoring by non-destructive testing (NDT) is an accepted procedure to early diagnosis of irregular process conditions, followed by an NDT-based feed back control and optimization. Consequently, the development of process integrated NDT is an important scientific task. Such developments have to fulfil the requirements of today’s industrial production concerning integrability, automation, speed, reliability and profitability. Flat steel production and processing, gas assisted injection moulding and cold joining processes are some examples of a successful application of the processintegrated NDT.

automation; mechanical material properties; micro-magnetic method; microwaves; nondestructive testing (NDT); process integrated NDT; process control; process monitoring; residual stress; tool-integrated sensor; ultrasound