Nondestructive Determination of Stresses in Steel Components by Eddy Current Method

2386 Views
1766 Downloads
Export citation: ABNT
UCHANIN, Valentyn ;MINAKOV, Sergej ;NARDONI, Giuseppe ;OSTASH, Orest ;FOMICHOV, Sergej .
Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.11, p. 690-697, november 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/nondestructive-determination-of-stresses-in-steel-components-by-eddy-current-method/>. Date accessed: 26 jun. 2022. 
doi:http://dx.doi.org/10.5545/sv-jme.2018.5208.
Uchanin, V., Minakov, S., Nardoni, G., Ostash, O., & Fomichov, S.
(2018).
Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method.
Strojniški vestnik - Journal of Mechanical Engineering, 64(11), 690-697.
doi:http://dx.doi.org/10.5545/sv-jme.2018.5208
@article{sv-jmesv-jme.2018.5208,
	author = {Valentyn  Uchanin and Sergej  Minakov and Giuseppe  Nardoni and Orest  Ostash and Sergej  Fomichov},
	title = {Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {11},
	year = {2018},
	keywords = {eddy current, magnetic anisotropy, applied and residual stresses, tensile, compressive, magnetic-mechanical hysteresis, welding, bridge framework},
	abstract = {Nondestructive eddy current (EC) method for evaluation of stresses in ferromagnetic steel components based on the stress-induced magnetic anisotropy (MA) changes was investigated. The proposed method is based on the rearrangement of the magnetic domains under stresses due to the reverse magnetostrictive effect (Villari effect). For evaluation of stresses special EC probe was developed. Investigations were carried out with the application of the conventional testing machine for tensile loading and the specially developed experimental set-up for four-point loading for creation the adjusted tensile and compressive stresses on different sided of the loaded specimen. From results obtained some specific properties were determined: the magnetic-mechanical hysteresis existence and the invariance feature in relation to the structural state of the material. The last result can create the outlook for stress measurement independently of the structural state of material as opposed to other known magnetic methods based on coercivity or Barkhausen noise measurements. Two original practical applications of the MA technique for stress determination were realized: the evaluation of the welding-induced residual stresses and the estimation of stresses in the steel bridge framework during the launching to the pillars.},
	issn = {0039-2480},	pages = {690-697},	doi = {10.5545/sv-jme.2018.5208},
	url = {https://www.sv-jme.eu/article/nondestructive-determination-of-stresses-in-steel-components-by-eddy-current-method/}
}
Uchanin, V.,Minakov, S.,Nardoni, G.,Ostash, O.,Fomichov, S.
2018 November 64. Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:11
%A Uchanin, Valentyn 
%A Minakov, Sergej 
%A Nardoni, Giuseppe 
%A Ostash, Orest 
%A Fomichov, Sergej 
%D 2018
%T Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method
%B 2018
%9 eddy current, magnetic anisotropy, applied and residual stresses, tensile, compressive, magnetic-mechanical hysteresis, welding, bridge framework
%! Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method
%K eddy current, magnetic anisotropy, applied and residual stresses, tensile, compressive, magnetic-mechanical hysteresis, welding, bridge framework
%X Nondestructive eddy current (EC) method for evaluation of stresses in ferromagnetic steel components based on the stress-induced magnetic anisotropy (MA) changes was investigated. The proposed method is based on the rearrangement of the magnetic domains under stresses due to the reverse magnetostrictive effect (Villari effect). For evaluation of stresses special EC probe was developed. Investigations were carried out with the application of the conventional testing machine for tensile loading and the specially developed experimental set-up for four-point loading for creation the adjusted tensile and compressive stresses on different sided of the loaded specimen. From results obtained some specific properties were determined: the magnetic-mechanical hysteresis existence and the invariance feature in relation to the structural state of the material. The last result can create the outlook for stress measurement independently of the structural state of material as opposed to other known magnetic methods based on coercivity or Barkhausen noise measurements. Two original practical applications of the MA technique for stress determination were realized: the evaluation of the welding-induced residual stresses and the estimation of stresses in the steel bridge framework during the launching to the pillars.
%U https://www.sv-jme.eu/article/nondestructive-determination-of-stresses-in-steel-components-by-eddy-current-method/
%0 Journal Article
%R 10.5545/sv-jme.2018.5208
%& 690
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 64
%N 11
%@ 0039-2480
%8 2018-11-06
%7 2018-11-06
Uchanin, Valentyn, Sergej  Minakov, Giuseppe  Nardoni, Orest  Ostash, & Sergej  Fomichov.
"Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.11 (2018): 690-697. Web.  26 Jun. 2022
TY  - JOUR
AU  - Uchanin, Valentyn 
AU  - Minakov, Sergej 
AU  - Nardoni, Giuseppe 
AU  - Ostash, Orest 
AU  - Fomichov, Sergej 
PY  - 2018
TI  - Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5208
KW  - eddy current, magnetic anisotropy, applied and residual stresses, tensile, compressive, magnetic-mechanical hysteresis, welding, bridge framework
N2  - Nondestructive eddy current (EC) method for evaluation of stresses in ferromagnetic steel components based on the stress-induced magnetic anisotropy (MA) changes was investigated. The proposed method is based on the rearrangement of the magnetic domains under stresses due to the reverse magnetostrictive effect (Villari effect). For evaluation of stresses special EC probe was developed. Investigations were carried out with the application of the conventional testing machine for tensile loading and the specially developed experimental set-up for four-point loading for creation the adjusted tensile and compressive stresses on different sided of the loaded specimen. From results obtained some specific properties were determined: the magnetic-mechanical hysteresis existence and the invariance feature in relation to the structural state of the material. The last result can create the outlook for stress measurement independently of the structural state of material as opposed to other known magnetic methods based on coercivity or Barkhausen noise measurements. Two original practical applications of the MA technique for stress determination were realized: the evaluation of the welding-induced residual stresses and the estimation of stresses in the steel bridge framework during the launching to the pillars.
UR  - https://www.sv-jme.eu/article/nondestructive-determination-of-stresses-in-steel-components-by-eddy-current-method/
@article{{sv-jme}{sv-jme.2018.5208},
	author = {Uchanin, V., Minakov, S., Nardoni, G., Ostash, O., Fomichov, S.},
	title = {Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {11},
	year = {2018},
	doi = {10.5545/sv-jme.2018.5208},
	url = {https://www.sv-jme.eu/article/nondestructive-determination-of-stresses-in-steel-components-by-eddy-current-method/}
}
TY  - JOUR
AU  - Uchanin, Valentyn 
AU  - Minakov, Sergej 
AU  - Nardoni, Giuseppe 
AU  - Ostash, Orest 
AU  - Fomichov, Sergej 
PY  - 2018/11/06
TI  - Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 11 (2018): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5208
KW  - eddy current, magnetic anisotropy, applied and residual stresses, tensile, compressive, magnetic-mechanical hysteresis, welding, bridge framework
N2  - Nondestructive eddy current (EC) method for evaluation of stresses in ferromagnetic steel components based on the stress-induced magnetic anisotropy (MA) changes was investigated. The proposed method is based on the rearrangement of the magnetic domains under stresses due to the reverse magnetostrictive effect (Villari effect). For evaluation of stresses special EC probe was developed. Investigations were carried out with the application of the conventional testing machine for tensile loading and the specially developed experimental set-up for four-point loading for creation the adjusted tensile and compressive stresses on different sided of the loaded specimen. From results obtained some specific properties were determined: the magnetic-mechanical hysteresis existence and the invariance feature in relation to the structural state of the material. The last result can create the outlook for stress measurement independently of the structural state of material as opposed to other known magnetic methods based on coercivity or Barkhausen noise measurements. Two original practical applications of the MA technique for stress determination were realized: the evaluation of the welding-induced residual stresses and the estimation of stresses in the steel bridge framework during the launching to the pillars.
UR  - https://www.sv-jme.eu/article/nondestructive-determination-of-stresses-in-steel-components-by-eddy-current-method/
Uchanin, Valentyn, Minakov, Sergej, Nardoni, Giuseppe, Ostash, Orest, AND Fomichov, Sergej.
"Nondestructive Determination of Stresses  in Steel Components by Eddy Current Method" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 11 (06 November 2018)

Authors

Affiliations

  • Karpenko Physico-mechanical Institute of Academy of Sciences of Ukraine, Ukraine 1
  • Kyiv Politechnical Institute, Ukraine 2
  • I&T Nardoni Institute, Italy 3

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 64(2018)11, 690-697
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2018.5208

Nondestructive eddy current (EC) method for evaluation of stresses in ferromagnetic steel components based on the stress-induced magnetic anisotropy (MA) changes was investigated. The proposed method is based on the rearrangement of the magnetic domains under stresses due to the reverse magnetostrictive effect (Villari effect). For evaluation of stresses special EC probe was developed. Investigations were carried out with the application of the conventional testing machine for tensile loading and the specially developed experimental set-up for four-point loading for creation the adjusted tensile and compressive stresses on different sided of the loaded specimen. From results obtained some specific properties were determined: the magnetic-mechanical hysteresis existence and the invariance feature in relation to the structural state of the material. The last result can create the outlook for stress measurement independently of the structural state of material as opposed to other known magnetic methods based on coercivity or Barkhausen noise measurements. Two original practical applications of the MA technique for stress determination were realized: the evaluation of the welding-induced residual stresses and the estimation of stresses in the steel bridge framework during the launching to the pillars.

eddy current, magnetic anisotropy, applied and residual stresses, tensile, compressive, magnetic-mechanical hysteresis, welding, bridge framework