Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.

1893 Views
1368 Downloads
Export citation: ABNT
JANSSEN, Francis-Paul E. M.;VAN LEEUWEN, Gerard M. J.;VAN STEENHOVEN, Anton A..
Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 51, n.7-8, p. 386-390, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/numerical-simulation-of-scalp-cooling-to-prevent-chemotherapy-induced-alopecia/>. Date accessed: 11 dec. 2024. 
doi:http://dx.doi.org/.
Janssen, F., van Leeuwen, G., & van Steenhoven, A.
(2005).
Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia..
Strojniški vestnik - Journal of Mechanical Engineering, 51(7-8), 386-390.
doi:http://dx.doi.org/
@article{.,
	author = {Francis-Paul E. M. Janssen and Gerard M. J. van Leeuwen and Anton A. van Steenhoven},
	title = {Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	keywords = {Numerical Simulation; Cooling; chemotherapy–Induced Alopecia.; },
	abstract = {One way of treating cancer is by chemotherapy. Side–effects of chemotherapy include hair loss. Cooling the scalp during treatment can reduce hair loss. For this cooling, a cap containing a cold fluid (cold cap) is used. However, the rate of success of this method varies strongly, because precise mechanisms of preservation are unknown. Temperature and perfusion are thought to play an important role in the hair preservative effect of scalp cooling. To gain more insight into these parameters, a computer model has been developed. With this, the influence of perfusion models is studied. The computer model comprises a head and cold cap, modeled with concentric shells representing brain, skull, fat, skin, hair and cold cap. Metabolism is temperature dependent and two relations from literature are used to model temperature dependent perfusion. Pennes’ bio–heat equation is used to determine the heat transfer in the head. Steady state temperatures without cold cap are calculated and used as basal temperatures for metabolism and perfusion. Then, a cold cap (T = -30˚C) is added and the development of temperature in time is calculated. For constant perfusion, a minimum skin temperature of 16.0˚C is reached after 476 seconds. When skin blood flow is set to zero, the minimum temperature drops a further 1.5˚C to 14.5˚C. For the perfusion models, the drop in skin temperature results in a decreased perfusion, down to a value ranging from 19% to 33% of base level. The thickness of the hair layer is of great importance for both perfusion and temperature. Reducing the thickness resulted in a decrease in temperature of 5.7˚C, and decreased relative perfusion by a further 0.10, indicating that chances of preserving hair are higher. For optimal protection against hair loss, the cold cap should fit the scalp as tightly as possible.},
	issn = {0039-2480},	pages = {386-390},	doi = {},
	url = {https://www.sv-jme.eu/article/numerical-simulation-of-scalp-cooling-to-prevent-chemotherapy-induced-alopecia/}
}
Janssen, F.,van Leeuwen, G.,van Steenhoven, A.
2005 November 51. Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 51:7-8
%A Janssen, Francis-Paul E. M.
%A van Leeuwen, Gerard M. J.
%A van Steenhoven, Anton A.
%D 2005
%T Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.
%B 2005
%9 Numerical Simulation; Cooling; chemotherapy–Induced Alopecia.; 
%! Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.
%K Numerical Simulation; Cooling; chemotherapy–Induced Alopecia.; 
%X One way of treating cancer is by chemotherapy. Side–effects of chemotherapy include hair loss. Cooling the scalp during treatment can reduce hair loss. For this cooling, a cap containing a cold fluid (cold cap) is used. However, the rate of success of this method varies strongly, because precise mechanisms of preservation are unknown. Temperature and perfusion are thought to play an important role in the hair preservative effect of scalp cooling. To gain more insight into these parameters, a computer model has been developed. With this, the influence of perfusion models is studied. The computer model comprises a head and cold cap, modeled with concentric shells representing brain, skull, fat, skin, hair and cold cap. Metabolism is temperature dependent and two relations from literature are used to model temperature dependent perfusion. Pennes’ bio–heat equation is used to determine the heat transfer in the head. Steady state temperatures without cold cap are calculated and used as basal temperatures for metabolism and perfusion. Then, a cold cap (T = -30˚C) is added and the development of temperature in time is calculated. For constant perfusion, a minimum skin temperature of 16.0˚C is reached after 476 seconds. When skin blood flow is set to zero, the minimum temperature drops a further 1.5˚C to 14.5˚C. For the perfusion models, the drop in skin temperature results in a decreased perfusion, down to a value ranging from 19% to 33% of base level. The thickness of the hair layer is of great importance for both perfusion and temperature. Reducing the thickness resulted in a decrease in temperature of 5.7˚C, and decreased relative perfusion by a further 0.10, indicating that chances of preserving hair are higher. For optimal protection against hair loss, the cold cap should fit the scalp as tightly as possible.
%U https://www.sv-jme.eu/article/numerical-simulation-of-scalp-cooling-to-prevent-chemotherapy-induced-alopecia/
%0 Journal Article
%R 
%& 386
%P 5
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 51
%N 7-8
%@ 0039-2480
%8 2017-11-03
%7 2017-11-03
Janssen, Francis-Paul, Gerard M. J. van Leeuwen, & Anton A. van Steenhoven.
"Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.." Strojniški vestnik - Journal of Mechanical Engineering [Online], 51.7-8 (2005): 386-390. Web.  11 Dec. 2024
TY  - JOUR
AU  - Janssen, Francis-Paul E. M.
AU  - van Leeuwen, Gerard M. J.
AU  - van Steenhoven, Anton A.
PY  - 2005
TI  - Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Numerical Simulation; Cooling; chemotherapy–Induced Alopecia.; 
N2  - One way of treating cancer is by chemotherapy. Side–effects of chemotherapy include hair loss. Cooling the scalp during treatment can reduce hair loss. For this cooling, a cap containing a cold fluid (cold cap) is used. However, the rate of success of this method varies strongly, because precise mechanisms of preservation are unknown. Temperature and perfusion are thought to play an important role in the hair preservative effect of scalp cooling. To gain more insight into these parameters, a computer model has been developed. With this, the influence of perfusion models is studied. The computer model comprises a head and cold cap, modeled with concentric shells representing brain, skull, fat, skin, hair and cold cap. Metabolism is temperature dependent and two relations from literature are used to model temperature dependent perfusion. Pennes’ bio–heat equation is used to determine the heat transfer in the head. Steady state temperatures without cold cap are calculated and used as basal temperatures for metabolism and perfusion. Then, a cold cap (T = -30˚C) is added and the development of temperature in time is calculated. For constant perfusion, a minimum skin temperature of 16.0˚C is reached after 476 seconds. When skin blood flow is set to zero, the minimum temperature drops a further 1.5˚C to 14.5˚C. For the perfusion models, the drop in skin temperature results in a decreased perfusion, down to a value ranging from 19% to 33% of base level. The thickness of the hair layer is of great importance for both perfusion and temperature. Reducing the thickness resulted in a decrease in temperature of 5.7˚C, and decreased relative perfusion by a further 0.10, indicating that chances of preserving hair are higher. For optimal protection against hair loss, the cold cap should fit the scalp as tightly as possible.
UR  - https://www.sv-jme.eu/article/numerical-simulation-of-scalp-cooling-to-prevent-chemotherapy-induced-alopecia/
@article{{}{.},
	author = {Janssen, F., van Leeuwen, G., van Steenhoven, A.},
	title = {Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	doi = {},
	url = {https://www.sv-jme.eu/article/numerical-simulation-of-scalp-cooling-to-prevent-chemotherapy-induced-alopecia/}
}
TY  - JOUR
AU  - Janssen, Francis-Paul E. M.
AU  - van Leeuwen, Gerard M. J.
AU  - van Steenhoven, Anton A.
PY  - 2017/11/03
TI  - Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia.
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 51, No 7-8 (2005): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Numerical Simulation, Cooling, chemotherapy–Induced Alopecia., 
N2  - One way of treating cancer is by chemotherapy. Side–effects of chemotherapy include hair loss. Cooling the scalp during treatment can reduce hair loss. For this cooling, a cap containing a cold fluid (cold cap) is used. However, the rate of success of this method varies strongly, because precise mechanisms of preservation are unknown. Temperature and perfusion are thought to play an important role in the hair preservative effect of scalp cooling. To gain more insight into these parameters, a computer model has been developed. With this, the influence of perfusion models is studied. The computer model comprises a head and cold cap, modeled with concentric shells representing brain, skull, fat, skin, hair and cold cap. Metabolism is temperature dependent and two relations from literature are used to model temperature dependent perfusion. Pennes’ bio–heat equation is used to determine the heat transfer in the head. Steady state temperatures without cold cap are calculated and used as basal temperatures for metabolism and perfusion. Then, a cold cap (T = -30˚C) is added and the development of temperature in time is calculated. For constant perfusion, a minimum skin temperature of 16.0˚C is reached after 476 seconds. When skin blood flow is set to zero, the minimum temperature drops a further 1.5˚C to 14.5˚C. For the perfusion models, the drop in skin temperature results in a decreased perfusion, down to a value ranging from 19% to 33% of base level. The thickness of the hair layer is of great importance for both perfusion and temperature. Reducing the thickness resulted in a decrease in temperature of 5.7˚C, and decreased relative perfusion by a further 0.10, indicating that chances of preserving hair are higher. For optimal protection against hair loss, the cold cap should fit the scalp as tightly as possible.
UR  - https://www.sv-jme.eu/article/numerical-simulation-of-scalp-cooling-to-prevent-chemotherapy-induced-alopecia/
Janssen, Francis-Paul, van Leeuwen, Gerard, AND van Steenhoven, Anton.
"Numerical Simulation of Scalp Cooling to Prevent Chemotherapy–Induced Alopecia." Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 51 Number 7-8 (03 November 2017)

Authors

Affiliations

  • Eindhoven University of Technology, The Netherlands
  • Eindhoven University of Technology, The Netherlands
  • Eindhoven University of Technology, The Netherlands

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 51(2005)7-8, 386-390
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

One way of treating cancer is by chemotherapy. Side–effects of chemotherapy include hair loss. Cooling the scalp during treatment can reduce hair loss. For this cooling, a cap containing a cold fluid (cold cap) is used. However, the rate of success of this method varies strongly, because precise mechanisms of preservation are unknown. Temperature and perfusion are thought to play an important role in the hair preservative effect of scalp cooling. To gain more insight into these parameters, a computer model has been developed. With this, the influence of perfusion models is studied. The computer model comprises a head and cold cap, modeled with concentric shells representing brain, skull, fat, skin, hair and cold cap. Metabolism is temperature dependent and two relations from literature are used to model temperature dependent perfusion. Pennes’ bio–heat equation is used to determine the heat transfer in the head. Steady state temperatures without cold cap are calculated and used as basal temperatures for metabolism and perfusion. Then, a cold cap (T = -30˚C) is added and the development of temperature in time is calculated. For constant perfusion, a minimum skin temperature of 16.0˚C is reached after 476 seconds. When skin blood flow is set to zero, the minimum temperature drops a further 1.5˚C to 14.5˚C. For the perfusion models, the drop in skin temperature results in a decreased perfusion, down to a value ranging from 19% to 33% of base level. The thickness of the hair layer is of great importance for both perfusion and temperature. Reducing the thickness resulted in a decrease in temperature of 5.7˚C, and decreased relative perfusion by a further 0.10, indicating that chances of preserving hair are higher. For optimal protection against hair loss, the cold cap should fit the scalp as tightly as possible.

Numerical Simulation; Cooling; chemotherapy–Induced Alopecia.;