On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling

2601 Views
1587 Downloads
Export citation: ABNT
KATRAŠNIK, Tomaž ;SCHUEMIE, Henrik Aleš;WURZENBERGER, Johann .
On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.4, p. 223-236, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/on-the-convergence-stability-and-computational-speed-of-numerical-schemes-for-0-d-ic-engine-cylinder-modelling/>. Date accessed: 01 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2012.668.
Katrašnik, T., Schuemie, H., & Wurzenberger, J.
(2013).
On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling.
Strojniški vestnik - Journal of Mechanical Engineering, 59(4), 223-236.
doi:http://dx.doi.org/10.5545/sv-jme.2012.668
@article{sv-jmesv-jme.2012.668,
	author = {Tomaž  Katrašnik and Henrik Aleš Schuemie and Johann  Wurzenberger},
	title = {On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {4},
	year = {2013},
	keywords = {Internal Combustion Engine Modeling; Integration Schemes; Convergence; Stability; Computational Speed},
	abstract = {The development of real time capable 0-dimensional internal combustion engine models places high demands on convergence, stability, and computational speed of the applied numerical methods. The cylinder model represents the crucial element in attaining high computational speed and accuracy of results. A basic example comprising a single cylinder connected to two plenums is analysed with different numerical schemes in order to reveal methods effectively associating accuracy requirements with computational time constraints. The integration performance to solve a system of coupled ODEs was compared for explicit Euler and explicit fourth order Runge-Kutta schemes, as well as for multi-step methods including backward differentiation formulas and Adams-Moulton formulas. The performed analysis emphasizes two major points. First, the numerical accuracy of integration schemes differs significantly at equal computational effort revealing the necessity of selecting an adequate scheme for a specific task. Second, the comparison of integral engine parameters (e.g. indicated mean effective pressure, mean engine torque), calculated by different methods, with a numerically assumed exact solution should not be used as an estimate for the convergence and stability of the applied numerical approach, since good agreement in integral parameters does not imply good agreement in cycle resolved traces of thermodynamic variables. This paper provides clear guidelines for selecting the appropriate numerical integration methods with respect to the intended application. Analyses are also based on innovative test examples. Finally, a comparison of numerical and experimental in-cylinder pressure traces is shown for a series production engine confirming the applicability and accuracy of the cylinder model.},
	issn = {0039-2480},	pages = {223-236},	doi = {10.5545/sv-jme.2012.668},
	url = {https://www.sv-jme.eu/article/on-the-convergence-stability-and-computational-speed-of-numerical-schemes-for-0-d-ic-engine-cylinder-modelling/}
}
Katrašnik, T.,Schuemie, H.,Wurzenberger, J.
2013 June 59. On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:4
%A Katrašnik, Tomaž 
%A Schuemie, Henrik Aleš
%A Wurzenberger, Johann 
%D 2013
%T On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling
%B 2013
%9 Internal Combustion Engine Modeling; Integration Schemes; Convergence; Stability; Computational Speed
%! On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling
%K Internal Combustion Engine Modeling; Integration Schemes; Convergence; Stability; Computational Speed
%X The development of real time capable 0-dimensional internal combustion engine models places high demands on convergence, stability, and computational speed of the applied numerical methods. The cylinder model represents the crucial element in attaining high computational speed and accuracy of results. A basic example comprising a single cylinder connected to two plenums is analysed with different numerical schemes in order to reveal methods effectively associating accuracy requirements with computational time constraints. The integration performance to solve a system of coupled ODEs was compared for explicit Euler and explicit fourth order Runge-Kutta schemes, as well as for multi-step methods including backward differentiation formulas and Adams-Moulton formulas. The performed analysis emphasizes two major points. First, the numerical accuracy of integration schemes differs significantly at equal computational effort revealing the necessity of selecting an adequate scheme for a specific task. Second, the comparison of integral engine parameters (e.g. indicated mean effective pressure, mean engine torque), calculated by different methods, with a numerically assumed exact solution should not be used as an estimate for the convergence and stability of the applied numerical approach, since good agreement in integral parameters does not imply good agreement in cycle resolved traces of thermodynamic variables. This paper provides clear guidelines for selecting the appropriate numerical integration methods with respect to the intended application. Analyses are also based on innovative test examples. Finally, a comparison of numerical and experimental in-cylinder pressure traces is shown for a series production engine confirming the applicability and accuracy of the cylinder model.
%U https://www.sv-jme.eu/article/on-the-convergence-stability-and-computational-speed-of-numerical-schemes-for-0-d-ic-engine-cylinder-modelling/
%0 Journal Article
%R 10.5545/sv-jme.2012.668
%& 223
%P 14
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 59
%N 4
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Katrašnik, Tomaž, Henrik Aleš Schuemie, & Johann  Wurzenberger.
"On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.4 (2013): 223-236. Web.  01 Dec. 2024
TY  - JOUR
AU  - Katrašnik, Tomaž 
AU  - Schuemie, Henrik Aleš
AU  - Wurzenberger, Johann 
PY  - 2013
TI  - On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.668
KW  - Internal Combustion Engine Modeling; Integration Schemes; Convergence; Stability; Computational Speed
N2  - The development of real time capable 0-dimensional internal combustion engine models places high demands on convergence, stability, and computational speed of the applied numerical methods. The cylinder model represents the crucial element in attaining high computational speed and accuracy of results. A basic example comprising a single cylinder connected to two plenums is analysed with different numerical schemes in order to reveal methods effectively associating accuracy requirements with computational time constraints. The integration performance to solve a system of coupled ODEs was compared for explicit Euler and explicit fourth order Runge-Kutta schemes, as well as for multi-step methods including backward differentiation formulas and Adams-Moulton formulas. The performed analysis emphasizes two major points. First, the numerical accuracy of integration schemes differs significantly at equal computational effort revealing the necessity of selecting an adequate scheme for a specific task. Second, the comparison of integral engine parameters (e.g. indicated mean effective pressure, mean engine torque), calculated by different methods, with a numerically assumed exact solution should not be used as an estimate for the convergence and stability of the applied numerical approach, since good agreement in integral parameters does not imply good agreement in cycle resolved traces of thermodynamic variables. This paper provides clear guidelines for selecting the appropriate numerical integration methods with respect to the intended application. Analyses are also based on innovative test examples. Finally, a comparison of numerical and experimental in-cylinder pressure traces is shown for a series production engine confirming the applicability and accuracy of the cylinder model.
UR  - https://www.sv-jme.eu/article/on-the-convergence-stability-and-computational-speed-of-numerical-schemes-for-0-d-ic-engine-cylinder-modelling/
@article{{sv-jme}{sv-jme.2012.668},
	author = {Katrašnik, T., Schuemie, H., Wurzenberger, J.},
	title = {On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {4},
	year = {2013},
	doi = {10.5545/sv-jme.2012.668},
	url = {https://www.sv-jme.eu/article/on-the-convergence-stability-and-computational-speed-of-numerical-schemes-for-0-d-ic-engine-cylinder-modelling/}
}
TY  - JOUR
AU  - Katrašnik, Tomaž 
AU  - Schuemie, Henrik Aleš
AU  - Wurzenberger, Johann 
PY  - 2018/06/28
TI  - On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 4 (2013): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.668
KW  - Internal Combustion Engine Modeling, Integration Schemes, Convergence, Stability, Computational Speed
N2  - The development of real time capable 0-dimensional internal combustion engine models places high demands on convergence, stability, and computational speed of the applied numerical methods. The cylinder model represents the crucial element in attaining high computational speed and accuracy of results. A basic example comprising a single cylinder connected to two plenums is analysed with different numerical schemes in order to reveal methods effectively associating accuracy requirements with computational time constraints. The integration performance to solve a system of coupled ODEs was compared for explicit Euler and explicit fourth order Runge-Kutta schemes, as well as for multi-step methods including backward differentiation formulas and Adams-Moulton formulas. The performed analysis emphasizes two major points. First, the numerical accuracy of integration schemes differs significantly at equal computational effort revealing the necessity of selecting an adequate scheme for a specific task. Second, the comparison of integral engine parameters (e.g. indicated mean effective pressure, mean engine torque), calculated by different methods, with a numerically assumed exact solution should not be used as an estimate for the convergence and stability of the applied numerical approach, since good agreement in integral parameters does not imply good agreement in cycle resolved traces of thermodynamic variables. This paper provides clear guidelines for selecting the appropriate numerical integration methods with respect to the intended application. Analyses are also based on innovative test examples. Finally, a comparison of numerical and experimental in-cylinder pressure traces is shown for a series production engine confirming the applicability and accuracy of the cylinder model.
UR  - https://www.sv-jme.eu/article/on-the-convergence-stability-and-computational-speed-of-numerical-schemes-for-0-d-ic-engine-cylinder-modelling/
Katrašnik, Tomaž, Schuemie, Henrik, AND Wurzenberger, Johann.
"On the Convergence, Stability, and Computational Speed of Numerical Schemes for 0-D IC Engine Cylinder Modelling" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 4 (28 June 2018)

Authors

Affiliations

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia 1
  • AVL List GmbH, Advanced Simulation Technologies, Austria 2

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 59(2013)4, 223-236
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2012.668

The development of real time capable 0-dimensional internal combustion engine models places high demands on convergence, stability, and computational speed of the applied numerical methods. The cylinder model represents the crucial element in attaining high computational speed and accuracy of results. A basic example comprising a single cylinder connected to two plenums is analysed with different numerical schemes in order to reveal methods effectively associating accuracy requirements with computational time constraints. The integration performance to solve a system of coupled ODEs was compared for explicit Euler and explicit fourth order Runge-Kutta schemes, as well as for multi-step methods including backward differentiation formulas and Adams-Moulton formulas. The performed analysis emphasizes two major points. First, the numerical accuracy of integration schemes differs significantly at equal computational effort revealing the necessity of selecting an adequate scheme for a specific task. Second, the comparison of integral engine parameters (e.g. indicated mean effective pressure, mean engine torque), calculated by different methods, with a numerically assumed exact solution should not be used as an estimate for the convergence and stability of the applied numerical approach, since good agreement in integral parameters does not imply good agreement in cycle resolved traces of thermodynamic variables. This paper provides clear guidelines for selecting the appropriate numerical integration methods with respect to the intended application. Analyses are also based on innovative test examples. Finally, a comparison of numerical and experimental in-cylinder pressure traces is shown for a series production engine confirming the applicability and accuracy of the cylinder model.

Internal Combustion Engine Modeling; Integration Schemes; Convergence; Stability; Computational Speed