Optimization of the Cutting-Stock Process

1997 Views
1056 Downloads
Export citation: ABNT
TRKMAN, Peter ;GRADIŠAR, Miro .
Optimization of the Cutting-Stock Process. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 49, n.9, p. 469-475, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/optimization-of-the-cutting-stock-process/>. Date accessed: 04 oct. 2024. 
doi:http://dx.doi.org/.
Trkman, P., & Gradišar, M.
(2003).
Optimization of the Cutting-Stock Process.
Strojniški vestnik - Journal of Mechanical Engineering, 49(9), 469-475.
doi:http://dx.doi.org/
@article{.,
	author = {Peter  Trkman and Miro  Gradišar},
	title = {Optimization of the Cutting-Stock Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {49},
	number = {9},
	year = {2003},
	keywords = {material cutting; cutting-optimization; one dimensional cutting; multicriterial decision-making; },
	abstract = {In this paper we deal with the problem of cost minimization in the General One-Dimensional Cutting Stock Problem in cases where the available material is not sufficient to satisfy the total demand. The decision about which order lengths will be cut and what will the cutting plan be, has to be made. The level of stock in the warehouse is taken into consideration as an important factor that affects the total inventory costs as well as the opportunity costs due to the nonfulfilment of the total order. The use of the model is demonstrated with a practical example.},
	issn = {0039-2480},	pages = {469-475},	doi = {},
	url = {https://www.sv-jme.eu/article/optimization-of-the-cutting-stock-process/}
}
Trkman, P.,Gradišar, M.
2003 July 49. Optimization of the Cutting-Stock Process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 49:9
%A Trkman, Peter 
%A Gradišar, Miro 
%D 2003
%T Optimization of the Cutting-Stock Process
%B 2003
%9 material cutting; cutting-optimization; one dimensional cutting; multicriterial decision-making; 
%! Optimization of the Cutting-Stock Process
%K material cutting; cutting-optimization; one dimensional cutting; multicriterial decision-making; 
%X In this paper we deal with the problem of cost minimization in the General One-Dimensional Cutting Stock Problem in cases where the available material is not sufficient to satisfy the total demand. The decision about which order lengths will be cut and what will the cutting plan be, has to be made. The level of stock in the warehouse is taken into consideration as an important factor that affects the total inventory costs as well as the opportunity costs due to the nonfulfilment of the total order. The use of the model is demonstrated with a practical example.
%U https://www.sv-jme.eu/article/optimization-of-the-cutting-stock-process/
%0 Journal Article
%R 
%& 469
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 49
%N 9
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Trkman, Peter, & Miro  Gradišar.
"Optimization of the Cutting-Stock Process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 49.9 (2003): 469-475. Web.  04 Oct. 2024
TY  - JOUR
AU  - Trkman, Peter 
AU  - Gradišar, Miro 
PY  - 2003
TI  - Optimization of the Cutting-Stock Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - material cutting; cutting-optimization; one dimensional cutting; multicriterial decision-making; 
N2  - In this paper we deal with the problem of cost minimization in the General One-Dimensional Cutting Stock Problem in cases where the available material is not sufficient to satisfy the total demand. The decision about which order lengths will be cut and what will the cutting plan be, has to be made. The level of stock in the warehouse is taken into consideration as an important factor that affects the total inventory costs as well as the opportunity costs due to the nonfulfilment of the total order. The use of the model is demonstrated with a practical example.
UR  - https://www.sv-jme.eu/article/optimization-of-the-cutting-stock-process/
@article{{}{.},
	author = {Trkman, P., Gradišar, M.},
	title = {Optimization of the Cutting-Stock Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {49},
	number = {9},
	year = {2003},
	doi = {},
	url = {https://www.sv-jme.eu/article/optimization-of-the-cutting-stock-process/}
}
TY  - JOUR
AU  - Trkman, Peter 
AU  - Gradišar, Miro 
PY  - 2017/07/07
TI  - Optimization of the Cutting-Stock Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 49, No 9 (2003): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - material cutting, cutting-optimization, one dimensional cutting, multicriterial decision-making, 
N2  - In this paper we deal with the problem of cost minimization in the General One-Dimensional Cutting Stock Problem in cases where the available material is not sufficient to satisfy the total demand. The decision about which order lengths will be cut and what will the cutting plan be, has to be made. The level of stock in the warehouse is taken into consideration as an important factor that affects the total inventory costs as well as the opportunity costs due to the nonfulfilment of the total order. The use of the model is demonstrated with a practical example.
UR  - https://www.sv-jme.eu/article/optimization-of-the-cutting-stock-process/
Trkman, Peter, AND Gradišar, Miro.
"Optimization of the Cutting-Stock Process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 49 Number 9 (07 July 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Economics, Slovenia
  • University of Ljubljana, Faculty of Economics, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 49(2003)9, 469-475
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

In this paper we deal with the problem of cost minimization in the General One-Dimensional Cutting Stock Problem in cases where the available material is not sufficient to satisfy the total demand. The decision about which order lengths will be cut and what will the cutting plan be, has to be made. The level of stock in the warehouse is taken into consideration as an important factor that affects the total inventory costs as well as the opportunity costs due to the nonfulfilment of the total order. The use of the model is demonstrated with a practical example.

material cutting; cutting-optimization; one dimensional cutting; multicriterial decision-making;