Phenomenological Sedimentation Model for an Industrial Circular Settling Tank

1860 Views
1477 Downloads
Export citation: ABNT
GOSAR, Leon ;STEINMAN, Franci ;ŠIROK, Brane ;BAJCAR, Tom .
Phenomenological Sedimentation Model for an Industrial Circular Settling Tank. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.5, p. 319-326, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/phenomenological-sedimentation-model-for-an-industrial-circular-settling-tank/>. Date accessed: 11 dec. 2024. 
doi:http://dx.doi.org/.
Gosar, L., Steinman, F., Širok, B., & Bajcar, T.
(2009).
Phenomenological Sedimentation Model for an Industrial Circular Settling Tank.
Strojniški vestnik - Journal of Mechanical Engineering, 55(5), 319-326.
doi:http://dx.doi.org/
@article{.,
	author = {Leon  Gosar and Franci  Steinman and Brane  Širok and Tom  Bajcar},
	title = {Phenomenological Sedimentation Model for an Industrial Circular Settling Tank},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {5},
	year = {2009},
	keywords = {wastewater; sediment; purification; sedimentation; },
	abstract = {The paper presents a study of the influence of integral parameters of an industrial settling tank on the process of sedimentation. An organic water suspension was used in the experiment where the impact of the suspension age on sedimentation was determined experimentally and by computer-aided visualization. Measurements of the inlet- and outlet suspension concentration, the difference in the level of suspension between the reservoir and settling tank as well as the suspension volume flow rate were carried out on a newly developed continuous sedimentation tank. The results of the measurements served as the basis for a phenomenological multi-regression model that was developed to determine the functional dependence of the ratio between inlet- and outlet suspension concentration on the independent parameters of the process. According to the obtained results of the model, the most influential parameters of the sedimentation process are the inlet concentration and the mass flow of the suspension.},
	issn = {0039-2480},	pages = {319-326},	doi = {},
	url = {https://www.sv-jme.eu/article/phenomenological-sedimentation-model-for-an-industrial-circular-settling-tank/}
}
Gosar, L.,Steinman, F.,Širok, B.,Bajcar, T.
2009 August 55. Phenomenological Sedimentation Model for an Industrial Circular Settling Tank. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:5
%A Gosar, Leon 
%A Steinman, Franci 
%A Širok, Brane 
%A Bajcar, Tom 
%D 2009
%T Phenomenological Sedimentation Model for an Industrial Circular Settling Tank
%B 2009
%9 wastewater; sediment; purification; sedimentation; 
%! Phenomenological Sedimentation Model for an Industrial Circular Settling Tank
%K wastewater; sediment; purification; sedimentation; 
%X The paper presents a study of the influence of integral parameters of an industrial settling tank on the process of sedimentation. An organic water suspension was used in the experiment where the impact of the suspension age on sedimentation was determined experimentally and by computer-aided visualization. Measurements of the inlet- and outlet suspension concentration, the difference in the level of suspension between the reservoir and settling tank as well as the suspension volume flow rate were carried out on a newly developed continuous sedimentation tank. The results of the measurements served as the basis for a phenomenological multi-regression model that was developed to determine the functional dependence of the ratio between inlet- and outlet suspension concentration on the independent parameters of the process. According to the obtained results of the model, the most influential parameters of the sedimentation process are the inlet concentration and the mass flow of the suspension.
%U https://www.sv-jme.eu/article/phenomenological-sedimentation-model-for-an-industrial-circular-settling-tank/
%0 Journal Article
%R 
%& 319
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 55
%N 5
%@ 0039-2480
%8 2017-08-21
%7 2017-08-21
Gosar, Leon, Franci  Steinman, Brane  Širok, & Tom  Bajcar.
"Phenomenological Sedimentation Model for an Industrial Circular Settling Tank." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.5 (2009): 319-326. Web.  11 Dec. 2024
TY  - JOUR
AU  - Gosar, Leon 
AU  - Steinman, Franci 
AU  - Širok, Brane 
AU  - Bajcar, Tom 
PY  - 2009
TI  - Phenomenological Sedimentation Model for an Industrial Circular Settling Tank
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - wastewater; sediment; purification; sedimentation; 
N2  - The paper presents a study of the influence of integral parameters of an industrial settling tank on the process of sedimentation. An organic water suspension was used in the experiment where the impact of the suspension age on sedimentation was determined experimentally and by computer-aided visualization. Measurements of the inlet- and outlet suspension concentration, the difference in the level of suspension between the reservoir and settling tank as well as the suspension volume flow rate were carried out on a newly developed continuous sedimentation tank. The results of the measurements served as the basis for a phenomenological multi-regression model that was developed to determine the functional dependence of the ratio between inlet- and outlet suspension concentration on the independent parameters of the process. According to the obtained results of the model, the most influential parameters of the sedimentation process are the inlet concentration and the mass flow of the suspension.
UR  - https://www.sv-jme.eu/article/phenomenological-sedimentation-model-for-an-industrial-circular-settling-tank/
@article{{}{.},
	author = {Gosar, L., Steinman, F., Širok, B., Bajcar, T.},
	title = {Phenomenological Sedimentation Model for an Industrial Circular Settling Tank},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {5},
	year = {2009},
	doi = {},
	url = {https://www.sv-jme.eu/article/phenomenological-sedimentation-model-for-an-industrial-circular-settling-tank/}
}
TY  - JOUR
AU  - Gosar, Leon 
AU  - Steinman, Franci 
AU  - Širok, Brane 
AU  - Bajcar, Tom 
PY  - 2017/08/21
TI  - Phenomenological Sedimentation Model for an Industrial Circular Settling Tank
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 5 (2009): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - wastewater, sediment, purification, sedimentation, 
N2  - The paper presents a study of the influence of integral parameters of an industrial settling tank on the process of sedimentation. An organic water suspension was used in the experiment where the impact of the suspension age on sedimentation was determined experimentally and by computer-aided visualization. Measurements of the inlet- and outlet suspension concentration, the difference in the level of suspension between the reservoir and settling tank as well as the suspension volume flow rate were carried out on a newly developed continuous sedimentation tank. The results of the measurements served as the basis for a phenomenological multi-regression model that was developed to determine the functional dependence of the ratio between inlet- and outlet suspension concentration on the independent parameters of the process. According to the obtained results of the model, the most influential parameters of the sedimentation process are the inlet concentration and the mass flow of the suspension.
UR  - https://www.sv-jme.eu/article/phenomenological-sedimentation-model-for-an-industrial-circular-settling-tank/
Gosar, Leon, Steinman, Franci, Širok, Brane, AND Bajcar, Tom.
"Phenomenological Sedimentation Model for an Industrial Circular Settling Tank" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 5 (21 August 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Civil and Geodetic Engineering, Slovenia
  • University of Ljubljana, Faculty of Civil and Geodetic Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 55(2009)5, 319-326
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The paper presents a study of the influence of integral parameters of an industrial settling tank on the process of sedimentation. An organic water suspension was used in the experiment where the impact of the suspension age on sedimentation was determined experimentally and by computer-aided visualization. Measurements of the inlet- and outlet suspension concentration, the difference in the level of suspension between the reservoir and settling tank as well as the suspension volume flow rate were carried out on a newly developed continuous sedimentation tank. The results of the measurements served as the basis for a phenomenological multi-regression model that was developed to determine the functional dependence of the ratio between inlet- and outlet suspension concentration on the independent parameters of the process. According to the obtained results of the model, the most influential parameters of the sedimentation process are the inlet concentration and the mass flow of the suspension.

wastewater; sediment; purification; sedimentation;