Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet

2872 Views
2052 Downloads
Export citation: ABNT
FILIP, Alexandru Catalin ;MORARIU, Cristin Olimpiu ;MIHAIL, Laurentiu ;OANCEA, Gheorghe .
Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 65, n.4, p. 230-237, december 2020. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/research-on-surface-roughness-of-hardox-steels-parts-machined-by-abrasive-waterjet/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2019.5998.
Filip, A., Morariu, C., Mihail, L., & Oancea, G.
(2019).
Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet.
Strojniški vestnik - Journal of Mechanical Engineering, 65(4), 230-237.
doi:http://dx.doi.org/10.5545/sv-jme.2019.5998
@article{sv-jmesv-jme.2019.5998,
	author = {Alexandru Catalin  Filip and Cristin Olimpiu  Morariu and Laurentiu  Mihail and Gheorghe  Oancea},
	title = {Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {4},
	year = {2019},
	keywords = {abrasive waterjet machining; Hardox steels; surface roughness; regression model},
	abstract = {This paper presents an experimental investigation on the abrasive waterjet machining (AWJM) of Hardox steels. A full factorial plan was designed and carried out to determine how the traverse speed, the material thickness, and the material type influence the surface roughness. Two materials were machined during the experiments: Hardox 450 and Hardox 500. The experimental data were analysed using statistical methods, and a mathematical model was obtained. Additional experiments were made to validate the model. The results proved that the analysis is accurate and the mathematical model will be a useful tool in industrial environments for process planning when abrasive waterjet machining is used for the considered material.},
	issn = {0039-2480},	pages = {230-237},	doi = {10.5545/sv-jme.2019.5998},
	url = {https://www.sv-jme.eu/article/research-on-surface-roughness-of-hardox-steels-parts-machined-by-abrasive-waterjet/}
}
Filip, A.,Morariu, C.,Mihail, L.,Oancea, G.
2019 December 65. Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 65:4
%A Filip, Alexandru Catalin 
%A Morariu, Cristin Olimpiu 
%A Mihail, Laurentiu 
%A Oancea, Gheorghe 
%D 2019
%T Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet
%B 2019
%9 abrasive waterjet machining; Hardox steels; surface roughness; regression model
%! Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet
%K abrasive waterjet machining; Hardox steels; surface roughness; regression model
%X This paper presents an experimental investigation on the abrasive waterjet machining (AWJM) of Hardox steels. A full factorial plan was designed and carried out to determine how the traverse speed, the material thickness, and the material type influence the surface roughness. Two materials were machined during the experiments: Hardox 450 and Hardox 500. The experimental data were analysed using statistical methods, and a mathematical model was obtained. Additional experiments were made to validate the model. The results proved that the analysis is accurate and the mathematical model will be a useful tool in industrial environments for process planning when abrasive waterjet machining is used for the considered material.
%U https://www.sv-jme.eu/article/research-on-surface-roughness-of-hardox-steels-parts-machined-by-abrasive-waterjet/
%0 Journal Article
%R 10.5545/sv-jme.2019.5998
%& 230
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 65
%N 4
%@ 0039-2480
%8 2020-12-08
%7 2020-12-08
Filip, Alexandru Catalin, Cristin Olimpiu  Morariu, Laurentiu  Mihail, & Gheorghe  Oancea.
"Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet." Strojniški vestnik - Journal of Mechanical Engineering [Online], 65.4 (2019): 230-237. Web.  29 Mar. 2024
TY  - JOUR
AU  - Filip, Alexandru Catalin 
AU  - Morariu, Cristin Olimpiu 
AU  - Mihail, Laurentiu 
AU  - Oancea, Gheorghe 
PY  - 2019
TI  - Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2019.5998
KW  - abrasive waterjet machining; Hardox steels; surface roughness; regression model
N2  - This paper presents an experimental investigation on the abrasive waterjet machining (AWJM) of Hardox steels. A full factorial plan was designed and carried out to determine how the traverse speed, the material thickness, and the material type influence the surface roughness. Two materials were machined during the experiments: Hardox 450 and Hardox 500. The experimental data were analysed using statistical methods, and a mathematical model was obtained. Additional experiments were made to validate the model. The results proved that the analysis is accurate and the mathematical model will be a useful tool in industrial environments for process planning when abrasive waterjet machining is used for the considered material.
UR  - https://www.sv-jme.eu/article/research-on-surface-roughness-of-hardox-steels-parts-machined-by-abrasive-waterjet/
@article{{sv-jme}{sv-jme.2019.5998},
	author = {Filip, A., Morariu, C., Mihail, L., Oancea, G.},
	title = {Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {4},
	year = {2019},
	doi = {10.5545/sv-jme.2019.5998},
	url = {https://www.sv-jme.eu/article/research-on-surface-roughness-of-hardox-steels-parts-machined-by-abrasive-waterjet/}
}
TY  - JOUR
AU  - Filip, Alexandru Catalin 
AU  - Morariu, Cristin Olimpiu 
AU  - Mihail, Laurentiu 
AU  - Oancea, Gheorghe 
PY  - 2020/12/08
TI  - Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 65, No 4 (2019): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2019.5998
KW  - abrasive waterjet machining, Hardox steels, surface roughness, regression model
N2  - This paper presents an experimental investigation on the abrasive waterjet machining (AWJM) of Hardox steels. A full factorial plan was designed and carried out to determine how the traverse speed, the material thickness, and the material type influence the surface roughness. Two materials were machined during the experiments: Hardox 450 and Hardox 500. The experimental data were analysed using statistical methods, and a mathematical model was obtained. Additional experiments were made to validate the model. The results proved that the analysis is accurate and the mathematical model will be a useful tool in industrial environments for process planning when abrasive waterjet machining is used for the considered material.
UR  - https://www.sv-jme.eu/article/research-on-surface-roughness-of-hardox-steels-parts-machined-by-abrasive-waterjet/
Filip, Alexandru Catalin, Morariu, Cristin Olimpiu, Mihail, Laurentiu, AND Oancea, Gheorghe.
"Research on Surface Roughness of Hardox Steels Parts Machined by Abrasive Waterjet" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 65 Number 4 (08 December 2020)

Authors

Affiliations

  • Transilvania University of Brasov, Department of Manufacturing Engineering, Romania 1

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 65(2019)4, 230-237
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2019.5998

This paper presents an experimental investigation on the abrasive waterjet machining (AWJM) of Hardox steels. A full factorial plan was designed and carried out to determine how the traverse speed, the material thickness, and the material type influence the surface roughness. Two materials were machined during the experiments: Hardox 450 and Hardox 500. The experimental data were analysed using statistical methods, and a mathematical model was obtained. Additional experiments were made to validate the model. The results proved that the analysis is accurate and the mathematical model will be a useful tool in industrial environments for process planning when abrasive waterjet machining is used for the considered material.

abrasive waterjet machining; Hardox steels; surface roughness; regression model