Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears

389 Views
241 Downloads
Export citation: ABNT
WANG, Bin ;YAN, Chenxiao ;LI, Jubo ;FENG, Peiyao ;WANG, Shuaipu ;CHEN, Shuo ;SU, Jianxin .
Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.3, p. 114-122, april 2021. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/residual-stress-and-deformation-analysis-in-machining-split-straight-bevel-gear/>. Date accessed: 22 sep. 2021. 
doi:http://dx.doi.org/10.5545/sv-jme.2020.7064.
Wang, B., Yan, C., Li, J., Feng, P., Wang, S., Chen, S., & Su, J.
(2021).
Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears.
Strojniški vestnik - Journal of Mechanical Engineering, 67(3), 114-122.
doi:http://dx.doi.org/10.5545/sv-jme.2020.7064
@article{sv-jmesv-jme.2020.7064,
	author = {Bin  Wang and Chenxiao  Yan and Jubo  Li and Peiyao  Feng and Shuaipu  Wang and Shuo  Chen and Jianxin  Su},
	title = {Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {3},
	year = {2021},
	keywords = {split straight bevel gear, residual stress, machining deformation, finite element model, deformation measurement},
	abstract = {In the machining of split straight bevel gears, the stiffness changes and internal stress are redistributed, which leads to serious deformation of the gear blank after machining. To rectify this problem, q finite element model is established by transforming the processing information of the gear blank into the finite element simulation calculation information, and the gear machining simulation of split straight bevel gear is carried out. Considering the material, design, and machining process of the gear blank, the characteristics and laws of internal stress variation during the gear machining are studied, and the internal mechanism and deformation law of split straight bevel gear are explored. Finally, the gear machining experiment, and the gear blank measurement are carried out. The results show that the deformation law of simulation is consistent with that of the experiment and the deformation characteristics of the split straight bevel gear are consistent with the change law of initial residual stress.},
	issn = {0039-2480},	pages = {114-122},	doi = {10.5545/sv-jme.2020.7064},
	url = {https://www.sv-jme.eu/article/residual-stress-and-deformation-analysis-in-machining-split-straight-bevel-gear/}
}
Wang, B.,Yan, C.,Li, J.,Feng, P.,Wang, S.,Chen, S.,Su, J.
2021 April 67. Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:3
%A Wang, Bin 
%A Yan, Chenxiao 
%A Li, Jubo 
%A Feng, Peiyao 
%A Wang, Shuaipu 
%A Chen, Shuo 
%A Su, Jianxin 
%D 2021
%T Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears
%B 2021
%9 split straight bevel gear, residual stress, machining deformation, finite element model, deformation measurement
%! Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears
%K split straight bevel gear, residual stress, machining deformation, finite element model, deformation measurement
%X In the machining of split straight bevel gears, the stiffness changes and internal stress are redistributed, which leads to serious deformation of the gear blank after machining. To rectify this problem, q finite element model is established by transforming the processing information of the gear blank into the finite element simulation calculation information, and the gear machining simulation of split straight bevel gear is carried out. Considering the material, design, and machining process of the gear blank, the characteristics and laws of internal stress variation during the gear machining are studied, and the internal mechanism and deformation law of split straight bevel gear are explored. Finally, the gear machining experiment, and the gear blank measurement are carried out. The results show that the deformation law of simulation is consistent with that of the experiment and the deformation characteristics of the split straight bevel gear are consistent with the change law of initial residual stress.
%U https://www.sv-jme.eu/article/residual-stress-and-deformation-analysis-in-machining-split-straight-bevel-gear/
%0 Journal Article
%R 10.5545/sv-jme.2020.7064
%& 114
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 67
%N 3
%@ 0039-2480
%8 2021-04-14
%7 2021-04-14
Wang, Bin, Chenxiao  Yan, Jubo  Li, Peiyao  Feng, Shuaipu  Wang, Shuo  Chen, & Jianxin  Su.
"Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.3 (2021): 114-122. Web.  22 Sep. 2021
TY  - JOUR
AU  - Wang, Bin 
AU  - Yan, Chenxiao 
AU  - Li, Jubo 
AU  - Feng, Peiyao 
AU  - Wang, Shuaipu 
AU  - Chen, Shuo 
AU  - Su, Jianxin 
PY  - 2021
TI  - Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2020.7064
KW  - split straight bevel gear, residual stress, machining deformation, finite element model, deformation measurement
N2  - In the machining of split straight bevel gears, the stiffness changes and internal stress are redistributed, which leads to serious deformation of the gear blank after machining. To rectify this problem, q finite element model is established by transforming the processing information of the gear blank into the finite element simulation calculation information, and the gear machining simulation of split straight bevel gear is carried out. Considering the material, design, and machining process of the gear blank, the characteristics and laws of internal stress variation during the gear machining are studied, and the internal mechanism and deformation law of split straight bevel gear are explored. Finally, the gear machining experiment, and the gear blank measurement are carried out. The results show that the deformation law of simulation is consistent with that of the experiment and the deformation characteristics of the split straight bevel gear are consistent with the change law of initial residual stress.
UR  - https://www.sv-jme.eu/article/residual-stress-and-deformation-analysis-in-machining-split-straight-bevel-gear/
@article{{sv-jme}{sv-jme.2020.7064},
	author = {Wang, B., Yan, C., Li, J., Feng, P., Wang, S., Chen, S., Su, J.},
	title = {Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {3},
	year = {2021},
	doi = {10.5545/sv-jme.2020.7064},
	url = {https://www.sv-jme.eu/article/residual-stress-and-deformation-analysis-in-machining-split-straight-bevel-gear/}
}
TY  - JOUR
AU  - Wang, Bin 
AU  - Yan, Chenxiao 
AU  - Li, Jubo 
AU  - Feng, Peiyao 
AU  - Wang, Shuaipu 
AU  - Chen, Shuo 
AU  - Su, Jianxin 
PY  - 2021/04/14
TI  - Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 3 (2021): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2020.7064
KW  - split straight bevel gear, residual stress, machining deformation, finite element model, deformation measurement
N2  - In the machining of split straight bevel gears, the stiffness changes and internal stress are redistributed, which leads to serious deformation of the gear blank after machining. To rectify this problem, q finite element model is established by transforming the processing information of the gear blank into the finite element simulation calculation information, and the gear machining simulation of split straight bevel gear is carried out. Considering the material, design, and machining process of the gear blank, the characteristics and laws of internal stress variation during the gear machining are studied, and the internal mechanism and deformation law of split straight bevel gear are explored. Finally, the gear machining experiment, and the gear blank measurement are carried out. The results show that the deformation law of simulation is consistent with that of the experiment and the deformation characteristics of the split straight bevel gear are consistent with the change law of initial residual stress.
UR  - https://www.sv-jme.eu/article/residual-stress-and-deformation-analysis-in-machining-split-straight-bevel-gear/
Wang, Bin, Yan, Chenxiao, Li, Jubo, Feng, Peiyao, Wang, Shuaipu, Chen, Shuo, AND Su, Jianxin.
"Residual Stress and Deformation Analysis in Machining Split Straight Bevel Gears" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 3 (14 April 2021)

Authors

Affiliations

  • Henan University of Science and Technology, School of Mechatronics Engineering, China Collaborative Innovation Center of Machinery Equipment Advanced Manufacturing, China 1
  • Henan University of Science and Technology, School of Mechatronics Engineering, China 2
  • Xinxiang Aviation Industry (Group) Co., China 3

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 67(2021)3, 114-122

https://doi.org/10.5545/sv-jme.2020.7064

In the machining of split straight bevel gears, the stiffness changes and internal stress are redistributed, which leads to serious deformation of the gear blank after machining. To rectify this problem, q finite element model is established by transforming the processing information of the gear blank into the finite element simulation calculation information, and the gear machining simulation of split straight bevel gear is carried out. Considering the material, design, and machining process of the gear blank, the characteristics and laws of internal stress variation during the gear machining are studied, and the internal mechanism and deformation law of split straight bevel gear are explored. Finally, the gear machining experiment, and the gear blank measurement are carried out. The results show that the deformation law of simulation is consistent with that of the experiment and the deformation characteristics of the split straight bevel gear are consistent with the change law of initial residual stress.

split straight bevel gear, residual stress, machining deformation, finite element model, deformation measurement