Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing

LIU, Youyu ;DIAO, Jiesheng .
Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.5, p. 330-340, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/six-axis-linkage-strategy-and-its-models-for-non-circular-helical-gears-based-on-diagonal-hobbing/>. Date accessed: 25 apr. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2014.2371.

Liu, Y., & Diao, J.
(2015).
Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing.
Strojniški vestnik - Journal of Mechanical Engineering, 61(5), 330-340.
doi:http://dx.doi.org/10.5545/sv-jme.2014.2371

@article{sv-jmesv-jme.2014.2371,
	author = {Youyu  Liu and Jiesheng  Diao},
	title = {Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {61},
	number = {5},
	year = {2015},
	keywords = {Non-Circular Helical Gears; Diagonal Hobbing; Linkage Models; Hob Life},
	abstract = {Among cutter teeth of the hob when hobbing non-circular helical gears, there are some issues such as uneven load and wear. To solve those problems, a simultaneous six-axis hobbing model had been developed based on diagonal hobbing. Four probable working conditions were provided. Linkage models corresponding to the four conditions were verified by virtual hobbing, in which the profile accuracies were compared and analyzed. The four working conditions were analyzed including linear (or angular) velocities and linear (or angular) accelerations. Consequently, two implementation strategies including repeating axial shift and reciprocating axial shift were offered. The linkage models and their strategies have been verified by hobbing testing. Experimental results show that diagonal hobbing is superior to non-diagonal hobbing in that the hob life of the former is 3.68 longer than that of the latter, and the micro-topography in the teeth surface of the former is more stable during transmission.},
	issn = {0039-2480},	pages = {330-340},	doi = {10.5545/sv-jme.2014.2371},
	url = {https://www.sv-jme.eu/article/six-axis-linkage-strategy-and-its-models-for-non-circular-helical-gears-based-on-diagonal-hobbing/}
}

Liu, Y.,Diao, J.
2015 June 61. Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:5

%A Liu, Youyu 
%A Diao, Jiesheng 
%D 2015
%T Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing
%B 2015
%9 Non-Circular Helical Gears; Diagonal Hobbing; Linkage Models; Hob Life
%! Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing
%K Non-Circular Helical Gears; Diagonal Hobbing; Linkage Models; Hob Life
%X Among cutter teeth of the hob when hobbing non-circular helical gears, there are some issues such as uneven load and wear. To solve those problems, a simultaneous six-axis hobbing model had been developed based on diagonal hobbing. Four probable working conditions were provided. Linkage models corresponding to the four conditions were verified by virtual hobbing, in which the profile accuracies were compared and analyzed. The four working conditions were analyzed including linear (or angular) velocities and linear (or angular) accelerations. Consequently, two implementation strategies including repeating axial shift and reciprocating axial shift were offered. The linkage models and their strategies have been verified by hobbing testing. Experimental results show that diagonal hobbing is superior to non-diagonal hobbing in that the hob life of the former is 3.68 longer than that of the latter, and the micro-topography in the teeth surface of the former is more stable during transmission.
%U https://www.sv-jme.eu/article/six-axis-linkage-strategy-and-its-models-for-non-circular-helical-gears-based-on-diagonal-hobbing/
%0 Journal Article
%R 10.5545/sv-jme.2014.2371
%& 330
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 61
%N 5
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27

Liu, Youyu, & Jiesheng  Diao.
"Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.5 (2015): 330-340. Web.  25 Apr. 2024

TY  - JOUR
AU  - Liu, Youyu 
AU  - Diao, Jiesheng 
PY  - 2015
TI  - Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2014.2371
KW  - Non-Circular Helical Gears; Diagonal Hobbing; Linkage Models; Hob Life
N2  - Among cutter teeth of the hob when hobbing non-circular helical gears, there are some issues such as uneven load and wear. To solve those problems, a simultaneous six-axis hobbing model had been developed based on diagonal hobbing. Four probable working conditions were provided. Linkage models corresponding to the four conditions were verified by virtual hobbing, in which the profile accuracies were compared and analyzed. The four working conditions were analyzed including linear (or angular) velocities and linear (or angular) accelerations. Consequently, two implementation strategies including repeating axial shift and reciprocating axial shift were offered. The linkage models and their strategies have been verified by hobbing testing. Experimental results show that diagonal hobbing is superior to non-diagonal hobbing in that the hob life of the former is 3.68 longer than that of the latter, and the micro-topography in the teeth surface of the former is more stable during transmission.
UR  - https://www.sv-jme.eu/article/six-axis-linkage-strategy-and-its-models-for-non-circular-helical-gears-based-on-diagonal-hobbing/

@article{{sv-jme}{sv-jme.2014.2371},
	author = {Liu, Y., Diao, J.},
	title = {Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {61},
	number = {5},
	year = {2015},
	doi = {10.5545/sv-jme.2014.2371},
	url = {https://www.sv-jme.eu/article/six-axis-linkage-strategy-and-its-models-for-non-circular-helical-gears-based-on-diagonal-hobbing/}
}

TY  - JOUR
AU  - Liu, Youyu 
AU  - Diao, Jiesheng 
PY  - 2018/06/27
TI  - Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 5 (2015): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2014.2371
KW  - Non-Circular Helical Gears, Diagonal Hobbing, Linkage Models, Hob Life
N2  - Among cutter teeth of the hob when hobbing non-circular helical gears, there are some issues such as uneven load and wear. To solve those problems, a simultaneous six-axis hobbing model had been developed based on diagonal hobbing. Four probable working conditions were provided. Linkage models corresponding to the four conditions were verified by virtual hobbing, in which the profile accuracies were compared and analyzed. The four working conditions were analyzed including linear (or angular) velocities and linear (or angular) accelerations. Consequently, two implementation strategies including repeating axial shift and reciprocating axial shift were offered. The linkage models and their strategies have been verified by hobbing testing. Experimental results show that diagonal hobbing is superior to non-diagonal hobbing in that the hob life of the former is 3.68 longer than that of the latter, and the micro-topography in the teeth surface of the former is more stable during transmission.
UR  - https://www.sv-jme.eu/article/six-axis-linkage-strategy-and-its-models-for-non-circular-helical-gears-based-on-diagonal-hobbing/

Liu, Youyu, AND Diao, Jiesheng.
"Six-Axis Linkage Strategy and Its Models for Non-Circular Helical Gears Based on Diagonal Hobbing" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 5 (27 June 2018)