NASTRAN, Miha ;KUZMAN, Karl . Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 49, n.6, p. 298-312, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/stabilizing-the-forming-properties-of-wire-by-using-a-rollerstraightening-process/>. Date accessed: 25 apr. 2024. doi:http://dx.doi.org/.
Nastran, M., & Kuzman, K. (2003). Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process. Strojniški vestnik - Journal of Mechanical Engineering, 49(6), 298-312. doi:http://dx.doi.org/
@article{.,
author = {Miha Nastran and Karl Kuzman},
title = {Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {49},
number = {6},
year = {2003},
keywords = {wire forming; wire straightening; forming properties; stability properties; },
abstract = {The unstable forming properties of input material cause many problems in automated production processes. This is particularly so in mass production, where automated assembly lines are increasingly common, and product uniformity is a priority. It is a fact that the main reasons for the fluctuations in part geometries are the inconsistent mechanical properties of the input material, and production engineers are often unable to influence this. Here we investigate the possibility of stabilizing the mechanical properties of wire by using a roller straightener, which is used in every wire-processing production process. At the beginning a short outline of the steels response during cyclic straining is given. This is followed by the modeling of the wire-straightening process and by the stabilization algorithm. Finally, the model is tested on a real industrial process the production of leverarch mechanisms for ringbinder files.},
issn = {0039-2480}, pages = {298-312}, doi = {},
url = {https://www.sv-jme.eu/article/stabilizing-the-forming-properties-of-wire-by-using-a-rollerstraightening-process/}
}
Nastran, M.,Kuzman, K. 2003 November 49. Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 49:6
%A Nastran, Miha %A Kuzman, Karl %D 2003 %T Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process %B 2003 %9 wire forming; wire straightening; forming properties; stability properties; %! Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process %K wire forming; wire straightening; forming properties; stability properties; %X The unstable forming properties of input material cause many problems in automated production processes. This is particularly so in mass production, where automated assembly lines are increasingly common, and product uniformity is a priority. It is a fact that the main reasons for the fluctuations in part geometries are the inconsistent mechanical properties of the input material, and production engineers are often unable to influence this. Here we investigate the possibility of stabilizing the mechanical properties of wire by using a roller straightener, which is used in every wire-processing production process. At the beginning a short outline of the steels response during cyclic straining is given. This is followed by the modeling of the wire-straightening process and by the stabilization algorithm. Finally, the model is tested on a real industrial process the production of leverarch mechanisms for ringbinder files. %U https://www.sv-jme.eu/article/stabilizing-the-forming-properties-of-wire-by-using-a-rollerstraightening-process/ %0 Journal Article %R %& 298 %P 15 %J Strojniški vestnik - Journal of Mechanical Engineering %V 49 %N 6 %@ 0039-2480 %8 2017-11-11 %7 2017-11-11
Nastran, Miha, & Karl Kuzman. "Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 49.6 (2003): 298-312. Web. 25 Apr. 2024
TY - JOUR AU - Nastran, Miha AU - Kuzman, Karl PY - 2003 TI - Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - wire forming; wire straightening; forming properties; stability properties; N2 - The unstable forming properties of input material cause many problems in automated production processes. This is particularly so in mass production, where automated assembly lines are increasingly common, and product uniformity is a priority. It is a fact that the main reasons for the fluctuations in part geometries are the inconsistent mechanical properties of the input material, and production engineers are often unable to influence this. Here we investigate the possibility of stabilizing the mechanical properties of wire by using a roller straightener, which is used in every wire-processing production process. At the beginning a short outline of the steels response during cyclic straining is given. This is followed by the modeling of the wire-straightening process and by the stabilization algorithm. Finally, the model is tested on a real industrial process the production of leverarch mechanisms for ringbinder files. UR - https://www.sv-jme.eu/article/stabilizing-the-forming-properties-of-wire-by-using-a-rollerstraightening-process/
@article{{}{.},
author = {Nastran, M., Kuzman, K.},
title = {Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {49},
number = {6},
year = {2003},
doi = {},
url = {https://www.sv-jme.eu/article/stabilizing-the-forming-properties-of-wire-by-using-a-rollerstraightening-process/}
}
TY - JOUR AU - Nastran, Miha AU - Kuzman, Karl PY - 2017/11/11 TI - Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 49, No 6 (2003): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - wire forming, wire straightening, forming properties, stability properties, N2 - The unstable forming properties of input material cause many problems in automated production processes. This is particularly so in mass production, where automated assembly lines are increasingly common, and product uniformity is a priority. It is a fact that the main reasons for the fluctuations in part geometries are the inconsistent mechanical properties of the input material, and production engineers are often unable to influence this. Here we investigate the possibility of stabilizing the mechanical properties of wire by using a roller straightener, which is used in every wire-processing production process. At the beginning a short outline of the steels response during cyclic straining is given. This is followed by the modeling of the wire-straightening process and by the stabilization algorithm. Finally, the model is tested on a real industrial process the production of leverarch mechanisms for ringbinder files. UR - https://www.sv-jme.eu/article/stabilizing-the-forming-properties-of-wire-by-using-a-rollerstraightening-process/
Nastran, Miha, AND Kuzman, Karl. "Stabilizing the Forming Properties of Wire by Using a Roller-Straightening Process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 49 Number 6 (11 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 49(2003)6, 298-312
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The unstable forming properties of input material cause many problems in automated production processes. This is particularly so in mass production, where automated assembly lines are increasingly common, and product uniformity is a priority. It is a fact that the main reasons for the fluctuations in part geometries are the inconsistent mechanical properties of the input material, and production engineers are often unable to influence this. Here we investigate the possibility of stabilizing the mechanical properties of wire by using a roller straightener, which is used in every wire-processing production process. At the beginning a short outline of the steels response during cyclic straining is given. This is followed by the modeling of the wire-straightening process and by the stabilization algorithm. Finally, the model is tested on a real industrial process the production of leverarch mechanisms for ringbinder files.