Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions

BELFORTE, Guido ;COLOMBO, Frederico ;RAPARELLI, Terenziano ;TRIVELLA, Andrea ;VIKTOROV, Vladimir .
Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.4, p. 261-267, october 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/static-behaviour-of-air-plane-pads-comparison-between-different-feeding-solutions/>. Date accessed: 25 apr. 2024. 
doi:http://dx.doi.org/.

Belforte, G., Colombo, F., Raparelli, T., Trivella, A., & Viktorov, V.
(2010).
Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions.
Strojniški vestnik - Journal of Mechanical Engineering, 56(4), 261-267.
doi:http://dx.doi.org/

@article{.,
	author = {Guido  Belforte and Frederico  Colombo and Terenziano  Raparelli and Andrea  Trivella and Vladimir  Viktorov},
	title = {Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {4},
	year = {2010},
	keywords = {gas thrust bearing; discharge coefficients; inherent orifices feeding system; circular pad; },
	abstract = {Air bearings are used among the others to support and guide coordinate measuring machines and instruments. There are different feeding solutions adopted to obtain the required stiffness and damping, often it is also important to minimize the air consumption. The purpose of this paper is to evaluate the effects of supply orifice number on the static characteristics of plane pad circular air bearings. Two solutions are experimentally investigated, with six and three supply inherent orifices of same dimensions. A test bench is used to obtain the static characteristics (load capacity and mass flow rate) of the pads. Then the static pressure distribution under the pads are experimentally determined in different directions. A numerical model is developed to simulate the behaviour of the pads; a comparisons between experimental and numerical results is presented.},
	issn = {0039-2480},	pages = {261-267},	doi = {},
	url = {https://www.sv-jme.eu/article/static-behaviour-of-air-plane-pads-comparison-between-different-feeding-solutions/}
}

Belforte, G.,Colombo, F.,Raparelli, T.,Trivella, A.,Viktorov, V.
2010 October 56. Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:4

%A Belforte, Guido 
%A Colombo, Frederico 
%A Raparelli, Terenziano 
%A Trivella, Andrea 
%A Viktorov, Vladimir 
%D 2010
%T Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions
%B 2010
%9 gas thrust bearing; discharge coefficients; inherent orifices feeding system; circular pad; 
%! Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions
%K gas thrust bearing; discharge coefficients; inherent orifices feeding system; circular pad; 
%X Air bearings are used among the others to support and guide coordinate measuring machines and instruments. There are different feeding solutions adopted to obtain the required stiffness and damping, often it is also important to minimize the air consumption. The purpose of this paper is to evaluate the effects of supply orifice number on the static characteristics of plane pad circular air bearings. Two solutions are experimentally investigated, with six and three supply inherent orifices of same dimensions. A test bench is used to obtain the static characteristics (load capacity and mass flow rate) of the pads. Then the static pressure distribution under the pads are experimentally determined in different directions. A numerical model is developed to simulate the behaviour of the pads; a comparisons between experimental and numerical results is presented.
%U https://www.sv-jme.eu/article/static-behaviour-of-air-plane-pads-comparison-between-different-feeding-solutions/
%0 Journal Article
%R 
%& 261
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 56
%N 4
%@ 0039-2480
%8 2017-10-24
%7 2017-10-24

Belforte, Guido, Frederico  Colombo, Terenziano  Raparelli, Andrea  Trivella, & Vladimir  Viktorov.
"Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.4 (2010): 261-267. Web.  25 Apr. 2024

TY  - JOUR
AU  - Belforte, Guido 
AU  - Colombo, Frederico 
AU  - Raparelli, Terenziano 
AU  - Trivella, Andrea 
AU  - Viktorov, Vladimir 
PY  - 2010
TI  - Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - gas thrust bearing; discharge coefficients; inherent orifices feeding system; circular pad; 
N2  - Air bearings are used among the others to support and guide coordinate measuring machines and instruments. There are different feeding solutions adopted to obtain the required stiffness and damping, often it is also important to minimize the air consumption. The purpose of this paper is to evaluate the effects of supply orifice number on the static characteristics of plane pad circular air bearings. Two solutions are experimentally investigated, with six and three supply inherent orifices of same dimensions. A test bench is used to obtain the static characteristics (load capacity and mass flow rate) of the pads. Then the static pressure distribution under the pads are experimentally determined in different directions. A numerical model is developed to simulate the behaviour of the pads; a comparisons between experimental and numerical results is presented.
UR  - https://www.sv-jme.eu/article/static-behaviour-of-air-plane-pads-comparison-between-different-feeding-solutions/

@article{{}{.},
	author = {Belforte, G., Colombo, F., Raparelli, T., Trivella, A., Viktorov, V.},
	title = {Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {4},
	year = {2010},
	doi = {},
	url = {https://www.sv-jme.eu/article/static-behaviour-of-air-plane-pads-comparison-between-different-feeding-solutions/}
}

TY  - JOUR
AU  - Belforte, Guido 
AU  - Colombo, Frederico 
AU  - Raparelli, Terenziano 
AU  - Trivella, Andrea 
AU  - Viktorov, Vladimir 
PY  - 2017/10/24
TI  - Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 4 (2010): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - gas thrust bearing, discharge coefficients, inherent orifices feeding system, circular pad, 
N2  - Air bearings are used among the others to support and guide coordinate measuring machines and instruments. There are different feeding solutions adopted to obtain the required stiffness and damping, often it is also important to minimize the air consumption. The purpose of this paper is to evaluate the effects of supply orifice number on the static characteristics of plane pad circular air bearings. Two solutions are experimentally investigated, with six and three supply inherent orifices of same dimensions. A test bench is used to obtain the static characteristics (load capacity and mass flow rate) of the pads. Then the static pressure distribution under the pads are experimentally determined in different directions. A numerical model is developed to simulate the behaviour of the pads; a comparisons between experimental and numerical results is presented.
UR  - https://www.sv-jme.eu/article/static-behaviour-of-air-plane-pads-comparison-between-different-feeding-solutions/

Belforte, Guido, Colombo, Frederico, Raparelli, Terenziano, Trivella, Andrea, AND Viktorov, Vladimir.
"Static Behaviour of Air Plane Pads: Comparison Between Different Feeding Solutions" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 4 (24 October 2017)