Strength Analysis of Low-Floor City Bus

1858 Views
1148 Downloads
Export citation: ABNT
MOLNÁR, Csaba .
Strength Analysis of Low-Floor City Bus. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 44, n.11-12, p. 333-339, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/strength-analysis-of-low-floor-city-bus/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/.
Molnár, C.
(1998).
Strength Analysis of Low-Floor City Bus.
Strojniški vestnik - Journal of Mechanical Engineering, 44(11-12), 333-339.
doi:http://dx.doi.org/
@article{.,
	author = {Csaba  Molnár},
	title = {Strength Analysis of Low-Floor City Bus},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {44},
	number = {11-12},
	year = {1998},
	keywords = {city buses; low-floor bus; strength analysis; finite element method; },
	abstract = {Concerning design of low-floor city bus framework some special problems have to be faced: - underframe having small structural height, - roof structure with increased load-bearing capability, - installation of main units (engine, axles). In order to be able to form the adequate framework for a low-floor city bus some strength calculations, static and fatigue laboratory tests, furthermore on-road tests are needed during the design process. Present paper deals with the finite element strength calculations and static tests carried out in the course of development process. The test conditions, evaluation of available results, comparison of computed and measured values will be discussed in detail. Our main aim was to develop a method, which can be used for comparing the single bus types or type versions, and in this way to promote the development process of a new bus structure},
	issn = {0039-2480},	pages = {333-339},	doi = {},
	url = {https://www.sv-jme.eu/article/strength-analysis-of-low-floor-city-bus/}
}
Molnár, C.
1998 November 44. Strength Analysis of Low-Floor City Bus. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 44:11-12
%A Molnár, Csaba 
%D 1998
%T Strength Analysis of Low-Floor City Bus
%B 1998
%9 city buses; low-floor bus; strength analysis; finite element method; 
%! Strength Analysis of Low-Floor City Bus
%K city buses; low-floor bus; strength analysis; finite element method; 
%X Concerning design of low-floor city bus framework some special problems have to be faced: - underframe having small structural height, - roof structure with increased load-bearing capability, - installation of main units (engine, axles). In order to be able to form the adequate framework for a low-floor city bus some strength calculations, static and fatigue laboratory tests, furthermore on-road tests are needed during the design process. Present paper deals with the finite element strength calculations and static tests carried out in the course of development process. The test conditions, evaluation of available results, comparison of computed and measured values will be discussed in detail. Our main aim was to develop a method, which can be used for comparing the single bus types or type versions, and in this way to promote the development process of a new bus structure
%U https://www.sv-jme.eu/article/strength-analysis-of-low-floor-city-bus/
%0 Journal Article
%R 
%& 333
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 44
%N 11-12
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Molnár, Csaba.
"Strength Analysis of Low-Floor City Bus." Strojniški vestnik - Journal of Mechanical Engineering [Online], 44.11-12 (1998): 333-339. Web.  29 Mar. 2024
TY  - JOUR
AU  - Molnár, Csaba 
PY  - 1998
TI  - Strength Analysis of Low-Floor City Bus
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - city buses; low-floor bus; strength analysis; finite element method; 
N2  - Concerning design of low-floor city bus framework some special problems have to be faced: - underframe having small structural height, - roof structure with increased load-bearing capability, - installation of main units (engine, axles). In order to be able to form the adequate framework for a low-floor city bus some strength calculations, static and fatigue laboratory tests, furthermore on-road tests are needed during the design process. Present paper deals with the finite element strength calculations and static tests carried out in the course of development process. The test conditions, evaluation of available results, comparison of computed and measured values will be discussed in detail. Our main aim was to develop a method, which can be used for comparing the single bus types or type versions, and in this way to promote the development process of a new bus structure
UR  - https://www.sv-jme.eu/article/strength-analysis-of-low-floor-city-bus/
@article{{}{.},
	author = {Molnár, C.},
	title = {Strength Analysis of Low-Floor City Bus},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {44},
	number = {11-12},
	year = {1998},
	doi = {},
	url = {https://www.sv-jme.eu/article/strength-analysis-of-low-floor-city-bus/}
}
TY  - JOUR
AU  - Molnár, Csaba 
PY  - 2017/11/11
TI  - Strength Analysis of Low-Floor City Bus
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 44, No 11-12 (1998): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - city buses, low-floor bus, strength analysis, finite element method, 
N2  - Concerning design of low-floor city bus framework some special problems have to be faced: - underframe having small structural height, - roof structure with increased load-bearing capability, - installation of main units (engine, axles). In order to be able to form the adequate framework for a low-floor city bus some strength calculations, static and fatigue laboratory tests, furthermore on-road tests are needed during the design process. Present paper deals with the finite element strength calculations and static tests carried out in the course of development process. The test conditions, evaluation of available results, comparison of computed and measured values will be discussed in detail. Our main aim was to develop a method, which can be used for comparing the single bus types or type versions, and in this way to promote the development process of a new bus structure
UR  - https://www.sv-jme.eu/article/strength-analysis-of-low-floor-city-bus/
Molnár, Csaba"Strength Analysis of Low-Floor City Bus" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 44 Number 11-12 (11 November 2017)

Authors

Affiliations

  • IKARUS, Vehicle Manufacturing Company, Budapest, Hungary

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 44(1998)11-12, 333-339
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

Concerning design of low-floor city bus framework some special problems have to be faced: - underframe having small structural height, - roof structure with increased load-bearing capability, - installation of main units (engine, axles). In order to be able to form the adequate framework for a low-floor city bus some strength calculations, static and fatigue laboratory tests, furthermore on-road tests are needed during the design process. Present paper deals with the finite element strength calculations and static tests carried out in the course of development process. The test conditions, evaluation of available results, comparison of computed and measured values will be discussed in detail. Our main aim was to develop a method, which can be used for comparing the single bus types or type versions, and in this way to promote the development process of a new bus structure

city buses; low-floor bus; strength analysis; finite element method;