SUNDRIYAL, Sanjay ;VIPIN, Vipin ;WALIA, Ravinderjit Singh. Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 66, n.4, p. 243-253, april 2020. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/study-on-influence-of-metallic-powder-in-near-dry-electric-discharge-machining/>. Date accessed: 07 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2019.6475.
Sundriyal, S., Vipin, V., & Walia, R. (2020). Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining. Strojniški vestnik - Journal of Mechanical Engineering, 66(4), 243-253. doi:http://dx.doi.org/10.5545/sv-jme.2019.6475
@article{sv-jmesv-jme.2019.6475, author = {Sanjay Sundriyal and Vipin Vipin and Ravinderjit Singh Walia}, title = {Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {66}, number = {4}, year = {2020}, keywords = {material removal rate; near-dry EDM; powder mixed near dry EDM; residual stress; surface roughness; tool wear rate}, abstract = {Near-dry electrical discharge machining (ND-EDM) is an eco-friendly process. In this study, an approach has been made to make the machining process more efficient than ND-EDM with the addition of metallic powder with the dielectric medium to machine EN-31 die steel. Powder mixed near-dry EDM (PMND-EDM) has several advantages over the ND-EDM or conventional electrical discharge machining (EDM) process, such as a higher material removal rate (MRR), fine surface finish (Ra), sharp cutting edge, lesser recast layer, and lower deposition of debris. The output response variables are MRR, Ra, residual stress (RS) and micro-hardness (MH) of the machined surfaces. Further study of the workpiece was performed, and a comparative study was conducted between ND-EDM and PMND-EDM. In this proposed method of machining, the MRR, Ra, and MH increased by 17.85 %, 16.36 %, and 62.69 % while RS was reduced by 56.09 %.}, issn = {0039-2480}, pages = {243-253}, doi = {10.5545/sv-jme.2019.6475}, url = {https://www.sv-jme.eu/article/study-on-influence-of-metallic-powder-in-near-dry-electric-discharge-machining/} }
Sundriyal, S.,Vipin, V.,Walia, R. 2020 April 66. Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 66:4
%A Sundriyal, Sanjay %A Vipin, Vipin %A Walia, Ravinderjit Singh %D 2020 %T Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining %B 2020 %9 material removal rate; near-dry EDM; powder mixed near dry EDM; residual stress; surface roughness; tool wear rate %! Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining %K material removal rate; near-dry EDM; powder mixed near dry EDM; residual stress; surface roughness; tool wear rate %X Near-dry electrical discharge machining (ND-EDM) is an eco-friendly process. In this study, an approach has been made to make the machining process more efficient than ND-EDM with the addition of metallic powder with the dielectric medium to machine EN-31 die steel. Powder mixed near-dry EDM (PMND-EDM) has several advantages over the ND-EDM or conventional electrical discharge machining (EDM) process, such as a higher material removal rate (MRR), fine surface finish (Ra), sharp cutting edge, lesser recast layer, and lower deposition of debris. The output response variables are MRR, Ra, residual stress (RS) and micro-hardness (MH) of the machined surfaces. Further study of the workpiece was performed, and a comparative study was conducted between ND-EDM and PMND-EDM. In this proposed method of machining, the MRR, Ra, and MH increased by 17.85 %, 16.36 %, and 62.69 % while RS was reduced by 56.09 %. %U https://www.sv-jme.eu/article/study-on-influence-of-metallic-powder-in-near-dry-electric-discharge-machining/ %0 Journal Article %R 10.5545/sv-jme.2019.6475 %& 243 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 66 %N 4 %@ 0039-2480 %8 2020-04-17 %7 2020-04-17
Sundriyal, Sanjay, Vipin Vipin, & Ravinderjit Singh Walia. "Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining." Strojniški vestnik - Journal of Mechanical Engineering [Online], 66.4 (2020): 243-253. Web. 07 Oct. 2024
TY - JOUR AU - Sundriyal, Sanjay AU - Vipin, Vipin AU - Walia, Ravinderjit Singh PY - 2020 TI - Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2019.6475 KW - material removal rate; near-dry EDM; powder mixed near dry EDM; residual stress; surface roughness; tool wear rate N2 - Near-dry electrical discharge machining (ND-EDM) is an eco-friendly process. In this study, an approach has been made to make the machining process more efficient than ND-EDM with the addition of metallic powder with the dielectric medium to machine EN-31 die steel. Powder mixed near-dry EDM (PMND-EDM) has several advantages over the ND-EDM or conventional electrical discharge machining (EDM) process, such as a higher material removal rate (MRR), fine surface finish (Ra), sharp cutting edge, lesser recast layer, and lower deposition of debris. The output response variables are MRR, Ra, residual stress (RS) and micro-hardness (MH) of the machined surfaces. Further study of the workpiece was performed, and a comparative study was conducted between ND-EDM and PMND-EDM. In this proposed method of machining, the MRR, Ra, and MH increased by 17.85 %, 16.36 %, and 62.69 % while RS was reduced by 56.09 %. UR - https://www.sv-jme.eu/article/study-on-influence-of-metallic-powder-in-near-dry-electric-discharge-machining/
@article{{sv-jme}{sv-jme.2019.6475}, author = {Sundriyal, S., Vipin, V., Walia, R.}, title = {Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {66}, number = {4}, year = {2020}, doi = {10.5545/sv-jme.2019.6475}, url = {https://www.sv-jme.eu/article/study-on-influence-of-metallic-powder-in-near-dry-electric-discharge-machining/} }
TY - JOUR AU - Sundriyal, Sanjay AU - Vipin, Vipin AU - Walia, Ravinderjit Singh PY - 2020/04/17 TI - Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 66, No 4 (2020): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2019.6475 KW - material removal rate, near-dry EDM, powder mixed near dry EDM, residual stress, surface roughness, tool wear rate N2 - Near-dry electrical discharge machining (ND-EDM) is an eco-friendly process. In this study, an approach has been made to make the machining process more efficient than ND-EDM with the addition of metallic powder with the dielectric medium to machine EN-31 die steel. Powder mixed near-dry EDM (PMND-EDM) has several advantages over the ND-EDM or conventional electrical discharge machining (EDM) process, such as a higher material removal rate (MRR), fine surface finish (Ra), sharp cutting edge, lesser recast layer, and lower deposition of debris. The output response variables are MRR, Ra, residual stress (RS) and micro-hardness (MH) of the machined surfaces. Further study of the workpiece was performed, and a comparative study was conducted between ND-EDM and PMND-EDM. In this proposed method of machining, the MRR, Ra, and MH increased by 17.85 %, 16.36 %, and 62.69 % while RS was reduced by 56.09 %. UR - https://www.sv-jme.eu/article/study-on-influence-of-metallic-powder-in-near-dry-electric-discharge-machining/
Sundriyal, Sanjay, Vipin, Vipin, AND Walia, Ravinderjit. "Study on the Influence of Metallic Powder in Near-Dry Electric Discharge Machining" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 66 Number 4 (17 April 2020)
Strojniški vestnik - Journal of Mechanical Engineering 66(2020)4, 243-253
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Near-dry electrical discharge machining (ND-EDM) is an eco-friendly process. In this study, an approach has been made to make the machining process more efficient than ND-EDM with the addition of metallic powder with the dielectric medium to machine EN-31 die steel. Powder mixed near-dry EDM (PMND-EDM) has several advantages over the ND-EDM or conventional electrical discharge machining (EDM) process, such as a higher material removal rate (MRR), fine surface finish (Ra), sharp cutting edge, lesser recast layer, and lower deposition of debris. The output response variables are MRR, Ra, residual stress (RS) and micro-hardness (MH) of the machined surfaces. Further study of the workpiece was performed, and a comparative study was conducted between ND-EDM and PMND-EDM. In this proposed method of machining, the MRR, Ra, and MH increased by 17.85 %, 16.36 %, and 62.69 % while RS was reduced by 56.09 %.