The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration

504 Views
189 Downloads
Export citation: ABNT
AČKO, Bojan .
The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.1, p. 2-8, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/the-experimental-validation-of-an-analytical-calculation-of-spheres-deformation-that-results-from-probing-force-during-calibration/>. Date accessed: 21 sep. 2019. 
doi:http://dx.doi.org/.
Ačko, B.
(2002).
The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration.
Strojniški vestnik - Journal of Mechanical Engineering, 48(1), 2-8.
doi:http://dx.doi.org/
@article{.,
	author = {Bojan  Ačko},
	title = {The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {1},
	year = {2002},
	keywords = {measurement force; deformation; diameter calibrations; uncertainty of measurements; },
	abstract = {The calibration of a sphere of a small diameter is very problematic in terms of the uncertainty of the measurement. This fact has often been demonstrated during numerous international interlaboratory comparisons. A particular problem occurs when calculating the deformation is caused by the measurement force. The reason for this is that we do not know enough about the mechanical properties of the probes of the measurement device or the sphere that is being calibrated. This paper introduces a procedure for the experimental determination of a sphere’s deformation during a calibration and an analysis of the results of an example of a ruby probe sphere. A comparison of these results with analytical calculation results is also presented. The analytical calculations were based on the material’s mechanical properties which were provided by different measurement-equipment manufacturers.},
	issn = {0039-2480},	pages = {2-8},	doi = {},
	url = {https://www.sv-jme.eu/article/the-experimental-validation-of-an-analytical-calculation-of-spheres-deformation-that-results-from-probing-force-during-calibration/}
}
Ačko, B.
2002 July 48. The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:1
%A Ačko, Bojan 
%D 2002
%T The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration
%B 2002
%9 measurement force; deformation; diameter calibrations; uncertainty of measurements; 
%! The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration
%K measurement force; deformation; diameter calibrations; uncertainty of measurements; 
%X The calibration of a sphere of a small diameter is very problematic in terms of the uncertainty of the measurement. This fact has often been demonstrated during numerous international interlaboratory comparisons. A particular problem occurs when calculating the deformation is caused by the measurement force. The reason for this is that we do not know enough about the mechanical properties of the probes of the measurement device or the sphere that is being calibrated. This paper introduces a procedure for the experimental determination of a sphere’s deformation during a calibration and an analysis of the results of an example of a ruby probe sphere. A comparison of these results with analytical calculation results is also presented. The analytical calculations were based on the material’s mechanical properties which were provided by different measurement-equipment manufacturers.
%U https://www.sv-jme.eu/article/the-experimental-validation-of-an-analytical-calculation-of-spheres-deformation-that-results-from-probing-force-during-calibration/
%0 Journal Article
%R 
%& 2
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 48
%N 1
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Ačko, Bojan.
"The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.1 (2002): 2-8. Web.  21 Sep. 2019
TY  - JOUR
AU  - Ačko, Bojan 
PY  - 2002
TI  - The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - measurement force; deformation; diameter calibrations; uncertainty of measurements; 
N2  - The calibration of a sphere of a small diameter is very problematic in terms of the uncertainty of the measurement. This fact has often been demonstrated during numerous international interlaboratory comparisons. A particular problem occurs when calculating the deformation is caused by the measurement force. The reason for this is that we do not know enough about the mechanical properties of the probes of the measurement device or the sphere that is being calibrated. This paper introduces a procedure for the experimental determination of a sphere’s deformation during a calibration and an analysis of the results of an example of a ruby probe sphere. A comparison of these results with analytical calculation results is also presented. The analytical calculations were based on the material’s mechanical properties which were provided by different measurement-equipment manufacturers.
UR  - https://www.sv-jme.eu/article/the-experimental-validation-of-an-analytical-calculation-of-spheres-deformation-that-results-from-probing-force-during-calibration/
@article{{}{.},
	author = {Ačko, B.},
	title = {The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {1},
	year = {2002},
	doi = {},
	url = {https://www.sv-jme.eu/article/the-experimental-validation-of-an-analytical-calculation-of-spheres-deformation-that-results-from-probing-force-during-calibration/}
}
TY  - JOUR
AU  - Ačko, Bojan 
PY  - 2017/07/07
TI  - The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 1 (2002): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - measurement force, deformation, diameter calibrations, uncertainty of measurements, 
N2  - The calibration of a sphere of a small diameter is very problematic in terms of the uncertainty of the measurement. This fact has often been demonstrated during numerous international interlaboratory comparisons. A particular problem occurs when calculating the deformation is caused by the measurement force. The reason for this is that we do not know enough about the mechanical properties of the probes of the measurement device or the sphere that is being calibrated. This paper introduces a procedure for the experimental determination of a sphere’s deformation during a calibration and an analysis of the results of an example of a ruby probe sphere. A comparison of these results with analytical calculation results is also presented. The analytical calculations were based on the material’s mechanical properties which were provided by different measurement-equipment manufacturers.
UR  - https://www.sv-jme.eu/article/the-experimental-validation-of-an-analytical-calculation-of-spheres-deformation-that-results-from-probing-force-during-calibration/
Ačko, Bojan"The Experimental Validation of an Analytical Calculation of Sphere’s Deformation that Results from Probing Force During Calibration" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 1 (07 July 2017)

Authors

Affiliations

  • University of Maribor, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 48(2002)1, 2-8

The calibration of a sphere of a small diameter is very problematic in terms of the uncertainty of the measurement. This fact has often been demonstrated during numerous international interlaboratory comparisons. A particular problem occurs when calculating the deformation is caused by the measurement force. The reason for this is that we do not know enough about the mechanical properties of the probes of the measurement device or the sphere that is being calibrated. This paper introduces a procedure for the experimental determination of a sphere’s deformation during a calibration and an analysis of the results of an example of a ruby probe sphere. A comparison of these results with analytical calculation results is also presented. The analytical calculations were based on the material’s mechanical properties which were provided by different measurement-equipment manufacturers.

measurement force; deformation; diameter calibrations; uncertainty of measurements;