Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control

1075 Views
1129 Downloads
Export citation: ABNT
NING, Peixing ;ZHAO, Ji ;JI, Shijun ;LI, Jingjin ;DAI, Handa .
Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.7-8, p. 343-351, august 2021. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/ultra-precision-single-point-diamond-turning-of-a-complex-sinusoidal-mesh-surface-by-active-control-machining-accuracy/>. Date accessed: 01 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2021.7172.
Ning, P., Zhao, J., Ji, S., Li, J., & Dai, H.
(2021).
Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control.
Strojniški vestnik - Journal of Mechanical Engineering, 67(7-8), 343-351.
doi:http://dx.doi.org/10.5545/sv-jme.2021.7172
@article{sv-jmesv-jme.2021.7172,
	author = {Peixing  Ning and Ji  Zhao and Shijun  Ji and Jingjin  Li and Handa  Dai},
	title = {Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {7-8},
	year = {2021},
	keywords = {machining accuracy active control (MAAC), machining error prediction, complex sinusoidal mesh surface, single-point diamond turning (SPDT)},
	abstract = {Single-point diamond turning (SPDT) assisted with slow tool servo (STS) is the most commonly utilized technique in the fabrication of optical modules. However, the tool path significantly affects the quality of the machined surface. In order to realize the determined machining accuracy effectively, a tool path generation (TPG) method based on machining accuracy active control (MAAC) is presented. The relationship between tool path and machining error is studied. Corner radius compensation (CRC) and the calculation of chord error and residual error are detailed. Finally, the effectiveness of the proposed approach is verified through a machining error simulation and a cutting experiment of a complex sinusoidal mesh surface fabrication.},
	issn = {0039-2480},	pages = {343-351},	doi = {10.5545/sv-jme.2021.7172},
	url = {https://www.sv-jme.eu/article/ultra-precision-single-point-diamond-turning-of-a-complex-sinusoidal-mesh-surface-by-active-control-machining-accuracy/}
}
Ning, P.,Zhao, J.,Ji, S.,Li, J.,Dai, H.
2021 August 67. Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:7-8
%A Ning, Peixing 
%A Zhao, Ji 
%A Ji, Shijun 
%A Li, Jingjin 
%A Dai, Handa 
%D 2021
%T Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control
%B 2021
%9 machining accuracy active control (MAAC), machining error prediction, complex sinusoidal mesh surface, single-point diamond turning (SPDT)
%! Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control
%K machining accuracy active control (MAAC), machining error prediction, complex sinusoidal mesh surface, single-point diamond turning (SPDT)
%X Single-point diamond turning (SPDT) assisted with slow tool servo (STS) is the most commonly utilized technique in the fabrication of optical modules. However, the tool path significantly affects the quality of the machined surface. In order to realize the determined machining accuracy effectively, a tool path generation (TPG) method based on machining accuracy active control (MAAC) is presented. The relationship between tool path and machining error is studied. Corner radius compensation (CRC) and the calculation of chord error and residual error are detailed. Finally, the effectiveness of the proposed approach is verified through a machining error simulation and a cutting experiment of a complex sinusoidal mesh surface fabrication.
%U https://www.sv-jme.eu/article/ultra-precision-single-point-diamond-turning-of-a-complex-sinusoidal-mesh-surface-by-active-control-machining-accuracy/
%0 Journal Article
%R 10.5545/sv-jme.2021.7172
%& 343
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 67
%N 7-8
%@ 0039-2480
%8 2021-08-26
%7 2021-08-26
Ning, Peixing, Ji  Zhao, Shijun  Ji, Jingjin  Li, & Handa  Dai.
"Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.7-8 (2021): 343-351. Web.  01 Mar. 2024
TY  - JOUR
AU  - Ning, Peixing 
AU  - Zhao, Ji 
AU  - Ji, Shijun 
AU  - Li, Jingjin 
AU  - Dai, Handa 
PY  - 2021
TI  - Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7172
KW  - machining accuracy active control (MAAC), machining error prediction, complex sinusoidal mesh surface, single-point diamond turning (SPDT)
N2  - Single-point diamond turning (SPDT) assisted with slow tool servo (STS) is the most commonly utilized technique in the fabrication of optical modules. However, the tool path significantly affects the quality of the machined surface. In order to realize the determined machining accuracy effectively, a tool path generation (TPG) method based on machining accuracy active control (MAAC) is presented. The relationship between tool path and machining error is studied. Corner radius compensation (CRC) and the calculation of chord error and residual error are detailed. Finally, the effectiveness of the proposed approach is verified through a machining error simulation and a cutting experiment of a complex sinusoidal mesh surface fabrication.
UR  - https://www.sv-jme.eu/article/ultra-precision-single-point-diamond-turning-of-a-complex-sinusoidal-mesh-surface-by-active-control-machining-accuracy/
@article{{sv-jme}{sv-jme.2021.7172},
	author = {Ning, P., Zhao, J., Ji, S., Li, J., Dai, H.},
	title = {Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {7-8},
	year = {2021},
	doi = {10.5545/sv-jme.2021.7172},
	url = {https://www.sv-jme.eu/article/ultra-precision-single-point-diamond-turning-of-a-complex-sinusoidal-mesh-surface-by-active-control-machining-accuracy/}
}
TY  - JOUR
AU  - Ning, Peixing 
AU  - Zhao, Ji 
AU  - Ji, Shijun 
AU  - Li, Jingjin 
AU  - Dai, Handa 
PY  - 2021/08/26
TI  - Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 7-8 (2021): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7172
KW  - machining accuracy active control (MAAC), machining error prediction, complex sinusoidal mesh surface, single-point diamond turning (SPDT)
N2  - Single-point diamond turning (SPDT) assisted with slow tool servo (STS) is the most commonly utilized technique in the fabrication of optical modules. However, the tool path significantly affects the quality of the machined surface. In order to realize the determined machining accuracy effectively, a tool path generation (TPG) method based on machining accuracy active control (MAAC) is presented. The relationship between tool path and machining error is studied. Corner radius compensation (CRC) and the calculation of chord error and residual error are detailed. Finally, the effectiveness of the proposed approach is verified through a machining error simulation and a cutting experiment of a complex sinusoidal mesh surface fabrication.
UR  - https://www.sv-jme.eu/article/ultra-precision-single-point-diamond-turning-of-a-complex-sinusoidal-mesh-surface-by-active-control-machining-accuracy/
Ning, Peixing, Zhao, Ji, Ji, Shijun, Li, Jingjin, AND Dai, Handa.
"Ultra-Precision Single-Point Diamond Turning of a Complex Sinusoidal Mesh Surface Using Machining Accuracy Active Control" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 7-8 (26 August 2021)

Authors

Affiliations

  • Jilin University, School of Mechanical and Aerospace Engineering, China 1
  • Jilin University, School of Mechanical and Aerospace Engineering, China Northeastern University, School of Mechanical Engineering and Automation, China 2

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 67(2021)7-8, 343-351
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2021.7172

Single-point diamond turning (SPDT) assisted with slow tool servo (STS) is the most commonly utilized technique in the fabrication of optical modules. However, the tool path significantly affects the quality of the machined surface. In order to realize the determined machining accuracy effectively, a tool path generation (TPG) method based on machining accuracy active control (MAAC) is presented. The relationship between tool path and machining error is studied. Corner radius compensation (CRC) and the calculation of chord error and residual error are detailed. Finally, the effectiveness of the proposed approach is verified through a machining error simulation and a cutting experiment of a complex sinusoidal mesh surface fabrication.

machining accuracy active control (MAAC), machining error prediction, complex sinusoidal mesh surface, single-point diamond turning (SPDT)