REN, Zoran ;PRAŠNIČKI, Martin ;GLAVAČ, Matej . Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 45, n.11, p. 442-450, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/computational-safety-inspection-of-a-rear-underrun-protection-device-for-loadcarrying-vehicles/>. Date accessed: 25 apr. 2024. doi:http://dx.doi.org/.
Ren, Z., Prašnički, M., & Glavač, M. (1999). Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles. Strojniški vestnik - Journal of Mechanical Engineering, 45(11), 442-450. doi:http://dx.doi.org/
@article{.,
author = {Zoran Ren and Martin Prašnički and Matej Glavač},
title = {Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {45},
number = {11},
year = {1999},
keywords = {protection devices; rear underrun protection; testing; computational simulation; },
abstract = {This paper describes the fundamentals of the present situation and explores the possibilities of new computational safety inspection procedures for rear underrun protection devices (RUPDs), which are essential for the approval of loadcarrying vehicles. A RUPD is required to comply with the ECE R 58 regulation, which provides strict requirements in terms of device design and its behaviour under loading. The regulation allows for computational safety inspection of the protection device, which has prompted research into exploring the possibilities of computational simulation of RUPD behaviour under loading. This paper describes the conditions and procedures for proper computational simulations, which are based on the finite element method. At this early stage of the research only the elastic response of the studied RUPD is considered in the computational analyses. The studied safety device has also been experimentally tested. Reasonably good agreement of computational and experimental results leads to the conclusion that computational analysis can be used for inspection of an RUPD.},
issn = {0039-2480}, pages = {442-450}, doi = {},
url = {https://www.sv-jme.eu/article/computational-safety-inspection-of-a-rear-underrun-protection-device-for-loadcarrying-vehicles/}
}
Ren, Z.,Prašnički, M.,Glavač, M. 1999 July 45. Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 45:11
%A Ren, Zoran %A Prašnički, Martin %A Glavač, Matej %D 1999 %T Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles %B 1999 %9 protection devices; rear underrun protection; testing; computational simulation; %! Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles %K protection devices; rear underrun protection; testing; computational simulation; %X This paper describes the fundamentals of the present situation and explores the possibilities of new computational safety inspection procedures for rear underrun protection devices (RUPDs), which are essential for the approval of loadcarrying vehicles. A RUPD is required to comply with the ECE R 58 regulation, which provides strict requirements in terms of device design and its behaviour under loading. The regulation allows for computational safety inspection of the protection device, which has prompted research into exploring the possibilities of computational simulation of RUPD behaviour under loading. This paper describes the conditions and procedures for proper computational simulations, which are based on the finite element method. At this early stage of the research only the elastic response of the studied RUPD is considered in the computational analyses. The studied safety device has also been experimentally tested. Reasonably good agreement of computational and experimental results leads to the conclusion that computational analysis can be used for inspection of an RUPD. %U https://www.sv-jme.eu/article/computational-safety-inspection-of-a-rear-underrun-protection-device-for-loadcarrying-vehicles/ %0 Journal Article %R %& 442 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 45 %N 11 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Ren, Zoran, Martin Prašnički, & Matej Glavač. "Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles." Strojniški vestnik - Journal of Mechanical Engineering [Online], 45.11 (1999): 442-450. Web. 25 Apr. 2024
TY - JOUR AU - Ren, Zoran AU - Prašnički, Martin AU - Glavač, Matej PY - 1999 TI - Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - protection devices; rear underrun protection; testing; computational simulation; N2 - This paper describes the fundamentals of the present situation and explores the possibilities of new computational safety inspection procedures for rear underrun protection devices (RUPDs), which are essential for the approval of loadcarrying vehicles. A RUPD is required to comply with the ECE R 58 regulation, which provides strict requirements in terms of device design and its behaviour under loading. The regulation allows for computational safety inspection of the protection device, which has prompted research into exploring the possibilities of computational simulation of RUPD behaviour under loading. This paper describes the conditions and procedures for proper computational simulations, which are based on the finite element method. At this early stage of the research only the elastic response of the studied RUPD is considered in the computational analyses. The studied safety device has also been experimentally tested. Reasonably good agreement of computational and experimental results leads to the conclusion that computational analysis can be used for inspection of an RUPD. UR - https://www.sv-jme.eu/article/computational-safety-inspection-of-a-rear-underrun-protection-device-for-loadcarrying-vehicles/
@article{{}{.},
author = {Ren, Z., Prašnički, M., Glavač, M.},
title = {Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {45},
number = {11},
year = {1999},
doi = {},
url = {https://www.sv-jme.eu/article/computational-safety-inspection-of-a-rear-underrun-protection-device-for-loadcarrying-vehicles/}
}
TY - JOUR AU - Ren, Zoran AU - Prašnički, Martin AU - Glavač, Matej PY - 2017/07/07 TI - Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 45, No 11 (1999): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - protection devices, rear underrun protection, testing, computational simulation, N2 - This paper describes the fundamentals of the present situation and explores the possibilities of new computational safety inspection procedures for rear underrun protection devices (RUPDs), which are essential for the approval of loadcarrying vehicles. A RUPD is required to comply with the ECE R 58 regulation, which provides strict requirements in terms of device design and its behaviour under loading. The regulation allows for computational safety inspection of the protection device, which has prompted research into exploring the possibilities of computational simulation of RUPD behaviour under loading. This paper describes the conditions and procedures for proper computational simulations, which are based on the finite element method. At this early stage of the research only the elastic response of the studied RUPD is considered in the computational analyses. The studied safety device has also been experimentally tested. Reasonably good agreement of computational and experimental results leads to the conclusion that computational analysis can be used for inspection of an RUPD. UR - https://www.sv-jme.eu/article/computational-safety-inspection-of-a-rear-underrun-protection-device-for-loadcarrying-vehicles/
Ren, Zoran, Prašnički, Martin, AND Glavač, Matej. "Computational Safety Inspection of a Rear Underrun Protection Device for Loadcarrying Vehicles" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 45 Number 11 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 45(1999)11, 442-450
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper describes the fundamentals of the present situation and explores the possibilities of new computational safety inspection procedures for rear underrun protection devices (RUPDs), which are essential for the approval of loadcarrying vehicles. A RUPD is required to comply with the ECE R 58 regulation, which provides strict requirements in terms of device design and its behaviour under loading. The regulation allows for computational safety inspection of the protection device, which has prompted research into exploring the possibilities of computational simulation of RUPD behaviour under loading. This paper describes the conditions and procedures for proper computational simulations, which are based on the finite element method. At this early stage of the research only the elastic response of the studied RUPD is considered in the computational analyses. The studied safety device has also been experimentally tested. Reasonably good agreement of computational and experimental results leads to the conclusion that computational analysis can be used for inspection of an RUPD.